The X201/200 Series is suitable for security & general industrial signalling applications where a more robust and powerful signal is required. These beacons are of the flashing mode type (single stage alarm). Xenon Beacons (sometimes called strobes) are controlled via a PCB and put out a brief, but a very bright flash of white light by ionizing and then discharging a large current through the Xenon gas. The design allows for termination inside the enclosure. This series incorporates an internal Fresnel lens designed to maximise the light intensity. A double flash option is available (activated by a slide switch on the PCB) that extends the signal duration making it more noticeable to the human eye. The DC unit is factory set at 24v but a slide switch on the PCB can change it to 12v operation. If you require a different mounting Base option, please refer to our X401/400 Datasheet. Features_ • Continuously rated • High Brightness • Suitable for surface, wall or conduit box mounting • Optional wall bracket - See accessories on page 2 • 360° light output around the vertical axis • 180° light output around the horizontal axis • UV Stable Polycarbonate Lens • UV Stable ABS Plastic Base ® [email protected] 9 77 Upper Conybere Street [email protected] Highgate, Birmingham

MOFLASH* 1SIGNALLING 1 Ordering Information Part Code APPROVALS & CONFORMITIES ® [email protected] [email protected] [email protected] 11 Upper Conybere Street Highgate, Birmingham B12 0EB, England