Datasheet - Beacon LED80

Product catalog summary

Overview
The LED80 ECO Series is a versatile and economical solution for general signaling needs, featuring 12 ultra-bright Surface Mount LEDs. It is suitable for local indication and can operate in either Flashing or Static Mode. The beacon is designed for easy installation with three mounting options: Surface, Conduit Box, or Wall Mounting.

Features

Material: UV Stable Polycarbonate Lens and ABS Plastic Base
Continuously rated with low current consumption
120° light output around the vertical axis
Available in voltage ranges of 10-100vDC and 115-230vAC
Operating temperature range: -25 to +55°C
Ingress Protection: IP67

Specifications

Flashing Mode: 60 flashes per minute with 4 rapid flashes per 1Hz cycle
Voltage and Current Consumption:
- 10-100vDC: 22mA @24vDC (Flashing), 20mA @24vDC (Static)
- 115-230vAC: 10mA @230vAC (Flashing), 9mA @230vAC (Static)
Effective Candela (Cd) by color:
- Amber: 5.67
- Red: 3.04
- Blue: 2.12
- Green: 3.83

Weights

Net Weight: 0.127 kg (10-100v), 0.138 kg (115-230v)
Gross Weight: 0.140 kg (10-100v), 0.152 kg (115-230v)

Ordering Information

10-100vDC:
- Amber: LED80-02-01
- Red: LED80-02-02
- Blue: LED80-02-03
- Green: LED80-02-04
115-230vAC:
- Amber: LED80-04-01
- Red: LED80-04-02
- Blue: LED80-04-03
- Green: LED80-04-04

Catalog excerpts

The LED80 ECO Series incorporates 12 ultra bright Surface Mount LEDs, offering an economic solution for a wide range of general signalling solutions. Ideally suited for local indication, the Beacon is controlled using either two wires for Flashing Mode or three wires for Static Mode. The Beacon is supplied fully assembled, ready for immediate installation and offers three mounting options: Surface, Conduit Box or Wall Mounting, using the two-piece fixing plate supplied. One plate is fixed to the appropriate surface, the other to the Beacon. The two plates then ‘Snap Fit' together to complete the installation. Please note, the mounting plate supplied is optional, as it is not required for surface/panel mounting. However, it is required when the Beacon cannot be mounted directly to a surface using the two studs located on the Base. Features_ • Continuously rated • Suitable for Stud Mount, Surface Mount or Conduit Box • 120° light output around the vertical axis Material • UV Stable Polycarbonate Lens • UV Stable ABS Plastic Base APPROVALS & CONFORMITIES 4 Rapid Flashes Per 1Hz Cycle ® [email protected] 9 77 Upper Conybere Street [email protected] Highgate, Birmingham

Open the catalog to page 1