GONIOMAT
14Pages

GONIOMAT Product Line Goniometers with Electronic Image Evaluation Angle Measurement – Objective, Precise and Accurate!

GONIOMAT Product Line The highly precise goniometers of the GONIOMAT product line are an indispensable measurement tool for inspection of incoming and outgoing parts as well as for small, medium or large volume production. They enable the angle measurement of optical prisms, polygon mirrors, wedges and angle gauge blocks with a measuring accuracy up to 0.4 arcsec. The high measuring accuracy and reproducibility of the measurement results are based on the combination of a precision rotary table with an angle encoder, a highly precise electronic autocollimator and a software-based image...

GONIOMAT Product Line Typical Applications Angle Measurement For mass production of prisms and angle gauge blocks the measurement of angular accuracy can take place on the production floor. In addition, the pyramidal error to the base will be determined. The software can report both: the result of a single measurement and the mean and distribution values of production lots. This information can be used to verify production consistency. Prism Measurement All angles of a prism can be measured for compliance to technical specifications in one measuring sequence. The reflections of all prism...

Deflection Angle Measurement The deflection angle can be measured for all planar optical components and assemblies. Similar to the wedge angle measurement, there is a highaccuracy method, a simple method and a fast method available. The highaccuracy method is comparable to the measurement principle of the "Reeve" method, published in NBSIR 76-993 by NIST. In contrast to the "Reeve" method, the report of the deflection angle is defined according to ISO 10110. Beam Splitter Cube Measurement The angle of the internal surface of a beam splitter cube can be measured. The internal angles are...

GONIOMAT Product Line GONIOMAT M5, M5 XL, M10 The GONIOMAT M line enables easy handling of many specimen types and high accuracy by the combination of a manual precision rotary table and software-based evaluation of the autocollimation image in relation to the encoder position. These goniometers are ideal for incoming and outgoing inspection as well as for production control. Short measurement times Objective measurement Logging of measurement results Easy handling Compact design for portability Measurement Principle: The GONIOMAT M consists of a mechanical pivot-mounted rotary table (1),...

The goniometers GONIOMAT M5 and M10 use different angle encoders and subsequently achieve different accuracies. Both variants benefit from the combination of modern USB-camera with MOLLER-WEDEL OPTICAL standard components and the innovation of the software GONIOMATIK. Features: ■ Accuracy GONIOMAT M5: 1.5" ■ Accuracy GONIOMAT M10: 2.5" ■ Additional support table H12 with three-point support ■ Extension for measurement of micro prisms possible (Alignment aid for micro prisms / page 12) GONIOMAT M5 XL The GONIOMAT M5 XL is especially suited for measuring optical systems with large fixtures...

GONIOMAT Product Line GONIOMAT A PLUS A5 , The GONIOMAT A line enables a fully-automatic measurement with the highest measurement accuracy by the combination of a motorized precision rotary table and software-based evaluation of the autocollimation image in relation to the encoder position. These goniometers are ideal for the inspection of specimens with high accuracy requirements and industrial volume production testing. Highest measurement accuracy High reproducibility Maintenance- and backlash-free drive Objective measurements Highly-accurate measurement of pyramidal angles Fast...

GONIOMAT APLUS The innovative, fully automatic GONIOMAT APLUSis distinguished by its highly precise bearing with backlash- and maintenance-free drive that reaches the same accuracy as a comparable air bearing. Thus the GONIOMAT APLUS does not require any compressed air. So it is just as portable as the other goniometers. Features: ■ Accu racy GONIOMAT APLUS: 0.4" ■ Precision bearing with backlash- and maintenance-free drive ■ Fast adjustment to different specimen sizes by three exchangeable support tables with kinematic mount ■ Integrated measuring cell ■ Expanded refractive index...

The software is an integral part of the GONIOMAT M and GONIOMAT A line. It distinguishes itself by a simple and well-thought-out operator interface and runs on WINDOWS® 7 and 10. The software enables: ■ Evaluation of measurements compliant to well-established standards (ISO 10110-1, VDI 2605, DIN 3140) ■ Comprehensive logging of measurement results ■ Presetting and monitoring of tolerances ■ Innovative ray-tracing analysis ■ Visualization of the autocollimation image and its deviation from the optical axis of the autocollimator ■ Integration of position of encoder and of autocollimation...

GONIOMAT Product Line Angle Measurement Standard Each GONIOMAT is supplied with an angle measurement standard for verification of the calibration status on-site. DescriptionArt.-No. Angle Measurement Standard241 612 Support Table H12 Each GONIOMAT M5, M10 and A5 is delivered with a support table H12. This allows the reliable measurement of small prisms. The distance between the optical axis of the autocollimator and the rotary table surface is reduced by 12 mm. DescriptionCommentArt.-No. Support Table H12 For GONIOMAT M5, M10 and A5241 611 Support Table H20, H35, H45 Each GONIOMAT APLUSis...

GONIOMAT Product Line Accessories Optional Alignment Aid for Micro-Prisms The alignment aid set for measurement of micro-prisms (down to 0.5 mm² surface area) simplifies the positioning of specimens to the autocollimator of GONIOMAT M in horizontal and vertical direction. The scope of delivery includes an alignment aid and a three-point tilt table for compensation of tilting angles of surfaces in the vertical direction. Description Alignment Aid for Micro-Prisms Tiltable Support Table H35 With the tiltable support table, the user can measure prism faces with large production tolerances or a...