NCM
2Pages

Catalog excerpts

NC SERIES PORTABLE ELECTRIC SUBMERSIBLE SLUDGE PUMP FOR CORROSIVE & ABRASIVE APPLICATIONS NON-CLOG SLUDGE SERIES DESIGN ADVANTAGES Stainless Steel Volute, Shaft, Impeller, Outlet and Hardware for maximum corrosion resistance. Choice of impeller materials: 1) 316 Stainless Steel for sea water and corrosive applications and; 2) Nitride Hardened 410 Stainless Steel for abrasive applications. (Standard) • Tandem Tungsten Carbide/Tungsten Carbide and Tungsten Carbide/Tungsten Carbide mechanical seals. • Mechanical Seals in wholly enclosed pressure compensated oil chamber. • Built-in Automatic ON/OFF/ON thermal overload switches protect the motor. Thermal Protectors wired directly to built-in contactor for maximum reliability. • Optional moisture sensor that detects progressive seal wear and automatically shuts down the pump. (External Relay Required) • Replaceable Nitrile Rubber-lined Wear Plate Optimizes efficiency throughout the life of the pump. • Equipped with Sacrificial Zinc Anodes for maximum life in a saline fluid environment. • Available in 316 Stainless Steel Construction with Silicon Carbide/Silicon Carbide Mechanical Sea

Open the catalog to page 1

ELECTRIC SUBMERSIBLE NON-CLOG SLUDGE PUMP NON-CLOG SLUDGE SERIES Max. Sphere Size 2.5”/65mm PERFORMANCE CURVES MODEL: NC 06M/08M/10M (50/60 Hz) MATERIALS OF CONSTRUCTION AND ENGINEERING DATA MOTOR 2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class 'H' (180°C) Speed : 3400 RPM @ 60 Hz, 2800 RPM @ 50 Hz Power Rating : 6/8/10HP @ 60 Hz, 4.5/6/7.5kW @ 50Hz Full Load Current FLA: 9.8, 12, 14 Amps @ 460v. 11, 13.8, 16 Amps @ 400v. Max. temperature of the pump liquid : 104°F/40°C Max. start/stop per hour : 15 POWER SUPPLY 3 phase, 50/60 Hz, AC Supply....

Open the catalog to page 2

NCM 2Pages

Catalog excerpts

All Mody Pumps (Europe) catalogs and technical brochures

NCM
2Pages