*mydirectindustry

NCM SS

Product catalog summary

Overview: The document details the specifications and features of the Non-Clog Sludge Pump Series, designed for corrosive and abrasive applications. These pumps are suitable for environments such as landfills, nuclear power plants, mines, and paper & pulp industries.

Specifications:

Available in 6 HP (4.5kW), 8 HP (6kW), and 10 HP (7.5kW) models.
Operates at 50/60 Hz with a 4" (100mm) flange or hose connection.
PH range of 2-10, suitable for handling contaminated fluids.

Design Advantages:

Constructed entirely from stainless steel for enhanced corrosion and abrasion resistance.
Non-clog design with 2.5” solid handling capability.
Choice of impeller materials: 316 Stainless Steel for corrosive applications and Nitride Hardened 410 Stainless Steel for abrasive applications.
Choice of mechanical seals: Tandem Mechanical Seals, TC/TC for pH above 5 and SC/SC for pH below 5.

Motor and Power Supply:

2-pole induction continuous rated motor with squirrel cage rotor.
Stator insulation class 'H' (180ºC) with speeds of 3400 RPM @ 60 Hz and 2800 RPM @ 50 Hz.
Power supply: 3 phase, 50/60 Hz, AC Supply, available in various voltage configurations.

Construction and Materials:

Stator casing, wear plate, and hardware made from 316 Stainless Steel.
Shaft made from 431 Stainless Steel.
Impeller options include Nitride Hardened 410SS or 316SS.

Additional Features:

Waterproof and oil-proof power cable, 50ft (15m) standard length.
Submergence range: minimum 8” (127mm) to maximum 50’ (15m).
Approximate weights: NC 06/SS - 167 lbs (76Kg), NC 08/SS - 185 lbs (84Kg), NC 10/SS - 194 lbs (88Kg).

Performance: The pumps are designed to handle a maximum sphere size of 2.5”/65mm, ensuring efficient operation in demanding conditions.

Catalog excerpts

ELECTRIC SUBMERSIBLE All STAINLESS STEEL PUMPS NON-CLOG SLUDGE PUMP SERIES ALL STAINLESS STEEL 50/60 HZ PORTABLE ELECTRIC SUBMERSIBLE SLUDGE PUMP FOR CORROSIVE & ABRASIVE APPLICATIONS Available in all Stainless Steel materials for corrosive and abrasive applications. These pumps are capable of handling contaminated fluids typical at most landfills, nuclear power plants, mines, paper & pulp industries. Non-Clog Sludge Series with 2 1/2” solid handling capabilities to meet the demands of the most critical applications. Choice of impeller materials: 1) 316 Stainless Steel for sea water and corrosive applications and; 2) Nitride Hardened 410 Stainless Steel for abrasive applications. (Standard) ………………………………………………………… Choice of Mechanical Seals: 1) Tandem Mechanical Seals, TC/TC (+ ph 5) and; 2) Tandem Mechanical Seals, SC/SC (- ph 5) (Standard)

Open the catalog to page 1

NON-CLOG I SLUDGE SERIES Max. Sphere Size 2.5”/65mm MATERIALS OF CONSTRUCTION AND ENGINEERING DATA MOTOR 2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class 'H' (180°C) Speed : 3400 RPM @ 60 Hz, 2800 RPM @ 50 Hz Power Rating : 6/8/10HP @ 60 Hz, 4.5/6/7.5kW @ 50Hz Full Load Current FLA: 9.8, 12, 14 Amps @ 460v. 11, 13.8, 16 Amps @ 400v. Max. temperature of the pump liquid : 104°F/40°C Max. start/stop per hour : 15 POWER SUPPLY 3 phase, 50/60 Hz, AC Supply. Available in any voltage frequency combination. (208/220/230/380/415/460/575/1000V) Moisture sensor available in...

Open the catalog to page 2

NCM SS

NCM SS

Catalog excerpts

All Mody Pumps (Europe) catalogs and technical brochures