*mydirectindustry

M900

Product catalog summary

Overview: The M-900 Series comprises portable electric submersible pumps designed for corrosive and abrasive applications. The series includes two models: M-902T and M-906T, both powered by a 35 HP (26kW) motor.

Model Specifications:

M-902T: 8” NPT or Hose, High Volume - Low Head.
M-906T: 6” NPT or Hose, Low Volume - High Head.

Design Advantages:

Stainless steel components for corrosion resistance.
Choice of impeller materials: 316 Stainless Steel for corrosive applications and Nitride Hardened 410 Stainless Steel for abrasive applications.
Tandem Tungsten Carbide mechanical seals in a pressure-compensated oil chamber.
Field adjustable Nitrile Rubber-lined Diffuser/Wear Plate for efficiency optimization.
Automatic thermal overloads and optional seal probe sensor.
1-meter SS sheath for power cable protection in demanding environments.
Equipped with sacrificial zinc anodes for saline environments.

Materials and Engineering Data:

Motor: 2-pole induction motor, 3400 RPM @ 60 Hz, 2800 RPM @ 50 Hz, with a power rating of 35HP @ 60 Hz, 26kW @ 50Hz.
Power Supply: 3 phase, 50/60 Hz, available in various voltage combinations.
Bearings: Single row deep groove upper bearing and double angular contact lower bearings with anti-corrosion additives.
Power Cable: Waterproof and oil-proof, 50ft. (15m) length standard.
Shaft Seal: Tandem Tungsten Carbide mechanical seals.
Corrosion Resistance: Epoxy coated steel and aluminum casings, Nitrile Rubber-lined diffuser/wear plate, and stainless steel components.
Strainer: 304 Stainless Steel with specific hole sizes for each model.
Submergence: Minimum 5” (127mm), maximum 50’ (15m).
Weights: M-902: 525lbs. (239Kg), M-906: 540lbs. (245Kg).

Performance Curves: Detailed performance curves are provided for both models at 50/60 Hz.

Catalog excerpts

PORTABLE ELECTRIC SUBMERSIBLE PUMP FOR CORROSIVE & ABRASIVE APPLICATIONS Stainless Steel Strainer, Shaft, Impeller, Outlet and Hardware for maximum corrosion resistance. Choice of impeller materials: 1) 316 Stainless Steel for sea water and corrosive applications and; Model M-902T 8” NPT or Hose 35 HP (26kW) (High Volume - Low Head) ……………………………………………………… Model M-906T 6” NPT or Hose 35 HP (26kW) (Low Volume - High Head) ……………………………………………………… 2) Nitride Hardened 410 Stainless Steel for abrasive applications. (Standard) • Tandem Tungsten Carbide/Tungsten Carbide and Tungsten Carbide/Tungsten Carbide mechanical seals. • Mechanical Seals in wholly enclosed pressure compensated oil chamber. • Field adjustable Nitrile Rubber-lined Diffuser/Wear Plate Optimizes efficiency throughout the life of the pump. Polyurethane Diffusers and Wear Plates are available. • Automatic ON/OFF/ON Thermal Overloads embedded in Stator Winding - requires built-in contactor optional. • Seal Probe Sensor Option available. Requires external controls. • 1 meter long SS Sheath protects the power cable in demanding mine applications. • Equipped with Sacrificial Zinc Anodes for maximum life in a saline fluid environment.

Open the catalog to page 1

ELECTRIC SUBMERSIBLE DRAINAGE PUMPM-900 SERIES 35HP (26kW) M-900 SERIES MATERIALS OF CONSTRUCTION AND ENGINEERING DATA MOTOR 2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class 'H' (180°C) Speed : 3400 RPM @ 60 Hz, 2800 RPM @ 50 Hz Power Rating : 35HP @ 60 Hz, 26kW @ 50Hz Full Load Current FLA: 44 Amps @ 460v. 51 Amps @ 400v. Max. temperature of the pump liquid : 104°F/40°C Max. start/stop per hour : 15 Star - Delta Starting Optional POWER SUPPLY 3 phase, 50/60 Hz, AC Supply. Available in any voltage frequency combination.(380/415/460/575/1000V) BALL BEARINGS Single...

Open the catalog to page 2

M900

M900

Catalog excerpts

All Mody Pumps (Europe) catalogs and technical brochures