PORTABLE ELECTRIC SUBMERSIBLE PUMP FOR CORROSIVE & ABRASIVE APPLICATIONS Stainless Steel Strainer, Shaft, Impeller, Outlet and Hardware for maximum corrosion resistance. Choice of impeller materials: 1) 316 Stainless Steel for sea water and corrosive applications and; Model M-702T 6” NPT or Hose 16 HP (12kW) (High Volume - Low Head) ……………………………………………………… Model M-706T 4” NPT or Hose 16 HP (12kW) (Low Volume - High Head) ……………………………………………………… 2) Nitride Hardened 410 Stainless Steel for abrasive applications. (Standard) • Tandem Tungsten Carbide/Tungsten Carbide and Tungsten Carbide/Tungsten Carbide mechanical seals. • Mechanical Seals in wholly enclosed pressure compensated oil chamber. • Field adjustable Nitrile Rubber-lined Diffuser/Wear Plate Optimizes efficiency throughout the life of the pump. Polyurethane Diffusers and Wear Plates are available. • Automatic ON/OFF/ON Thermal Overloads embedded in Stator Winding - requires built-in contactor optional. • Seal Probe Sensor Option available. Requires external controls. • 1 meter long SS Sheath protects the power cable in demanding mine applications. • Equipped with Sacrificial Zinc Anodes for maximum life in a saline fluid environment. Mody Pumps® Inc. 2166 Zeus Court, Bakersfield, CA 93308. USA Tel.: (661) 392-7600 • Fax: (661) 392-7601 http://www.modypump.com E-mail: [email protected]

M-700 SERIES MATERIALS OF CONSTRUCTION AND ENGINEERING DATA MOTOR 2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class 'H' (180ºC) Speed : 3400 RPM @ 60 Hz, 2800 RPM @ 50 Hz Power Rating : 16HP @ 60 Hz, 12kW @ 50Hz Full Load Current FLA: 22 Amps @ 460v. 25 Amps @ 400v. Max. temperature of the pump liquid : 104°F/40°C Max. start/stop per hour : 15 Star - Delta Starting Optional POWER SUPPLY 3 phase, 50/60 Hz, AC Supply. Available in any voltage frequency combination.(208/220/230/380/415/460/575/1000V) BALL BEARINGS Single row deep groove upper bearing. Double...