G-500/530/550 SERIES PORTABLE ELECTRIC SUBMERSIBLE PUMP FOR CORROSIVE & ABRASIVE APPLICATIONS ………………………………………………………… Stainless Steel Strainer, Shaft, Impeller, Outlet and Hardware for maximum corrosion resistance. Choice of impeller materials: 1) 316 Stainless Steel for sea water and corrosive applications and; 2) Nitride Hardened 410 Stainless Steel for abrasive applications. (Standard) • Tandem Tungsten Carbide/Tungsten Carbide and Tungsten Carbide/Tungsten Carbide mechanical seals. • Mechanical Seals in wholly enclosed pressure compensated oil chamber. • Field adjustable Nitrile Rubber-lined Diffuser/Wear Plate Optimizes efficiency throughout the life of the pump. Optional Polyurethane Diffusers and Wear Plates are available. • Automatic ON/OFF/ON Thermal Overloads embedded in Stator Winding Optional - requires 6 core cable and external controls. • Equipped with Sacrificial Zinc Anodes for maximum life in a saline fluid environment. • Available in complete 316 Stainless Steel Construction with Silicon Carbide/Silicon Carbide Mechanical Seals and Viton® Elastomers. Mody Pumps® Inc. 2166 Zeus Court, Bakersfield, CA 93308. USA Tel.: (661) 392-7600 • Fax: (661) 392-7601 http://www.modypump.com E-mail: [email protected] 03.10.Rev.0

G-500/530/550 SERIES MATERIALS OF CONSTRUCTION AND ENGINEERING DATA MOTOR 2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class 'H' (180ºC) Speed : 3400 RPM @ 60 Hz, 2800 RPM @ 50 Hz Power Rating : 5HP/7.5HP/10HP @ 60 Hz, 3.7kW/5.5kW/7.5kW @ 50Hz Full Load Current FLA: 7.1, 11, 14 Amps @ 460v. 8.1, 12.5, 16 @ 400v. Max. temperature of the pump liquid: 104°F/40°C Max. start/stop per hour : 15 POWER SUPPLY MODEL 3 phase, 50/60 Hz, AC Supply. Available in any voltage frequency combination.(208/220/230/380/415/460/575/1000V) BALL BEARINGS The rotor shaft is carried...