• Model A: Capacity: 100 m³/h (440 USGPM), Head: 72 m (234 ft), Impeller Diameter: 435 mm (17.4 in), Weight: 1100 kg (2420 lbs).
• Model B: Capacity: 200 m³/h (880 USGPM), Head: 60 m (195 ft), Impeller Diameter: 435 mm (17.4 in), Weight: 1130 kg (2486 lbs).
• Model C: Capacity: 300 m³/h (1320 USGPM), Head: 42.5 m (138 ft), Impeller Diameter: 435 mm (17.4 in), Weight: 1160 kg (2552 lbs).
• Flanged Bore Size: DN100 PN10 (4 in) for Model A, DN150 PN10 (6 in) for Model B, DN200 PN10 (8 in) for Model C.
• Cross Section Diameter: 35 mm (1.4 in).

• Power: 90 kW (120 HP).
• Voltage/Current: 460 V/141 A.
• Phases/Poles/Frequency: 3/4/60 Hz.
• Speed: 1750 RPM.
• Insulation Class: H.
• Power Cable: 20m (IEC 60245-4) H07RN-F 4G35.

• Casing: Spheroidal cast iron EN-GJS-800-2 (EN 1563).
• Motor Housing: Cast iron EN-GJL-250 (EN 1561).
• Wear Parts: High chrome EN-GJN-HV600 (XCr18) (EN 12513).
• Main Shaft: High tensile steel 39NiCrMo3 (AISI 9840).

• Motor Side Seals: 1 mechanical seal (silicon carbide in oil bath).
• Impeller Side Seals: 1 mechanical seal (silicon carbide in oil bath) + 1 lip seal (BUNA) + 1 V-RING (TPU).
• Oil Type: ISO 320.

• H: 1450 mm (58 in), W: 902 mm (36 in), D: 774 mm (31 in), F: 600 mm (24 in), H1: 1000 mm (40 in), A: 374 mm (15 in), B: 418 mm (16.7 in), C: 363 mm (14.5 in).

Performance curves are provided for detailed analysis of pump efficiency and operational parameters.