SERIES 310 ENHANCED RANGE PULSE INDUCTION METAL DETECTOR
2Pages

MODULOC®Control SystemsSERIES 310 ENHANCED RANGE PULSE INDUCTION METAL DETECTOR FOR DETECTING INDIVIDUAL BARS ACROSS WIDE ROLLER TABLES • Mounts in confined space close to rollers or in steel enclosure • Glass fibre coil withstands bar at 300°C passing over it • Detects small bar and section at 120 mm range regardless of size • Narrow profiled coil built-to-order of up to 2 mtrs length • PTFE and stainless loop Coils for high temperature use • Controller mounts up to 30 mtrs from the Coil These Series 310 Metal Detectors operate by generating a pulsed flux and monitoring its rate of collapse when the metal bar passes overhead. This method of detection provides 3 times the range of inductive Sensors. In addition the coils may be mounted closely surrounded by metalwork or secured within protective steel enclosure. Furthermore, as the coil windings are PTFE insulated can be used where the bar relatively hot. The detector coils are provided in profiled glass fibre cases or PTFE coil plates with optional PTFE flying leads for high temperature areas. Stainless loop detector coils available for Cooling beds. Changes in ambient do not influence operating range. These Detectors are the ideal solution where the user needs to detect individual bars across wide roller tables where Inductive sensors are in adequate. Also well suited for cooling beds as the remote coils can be provide in PTFE Coil plates supported in protective metal frame. Alternatively as a stainless loop Controller Features: • Auto Zero button provided • Volt free relay output • Voltmeter shows zero drift Detector Coil Features: • Mounts close within metalwork • Up to 40 mtrs of coax connection • Not effected by changing ambient • Mill contaminate falls off profiled coils • Length made to order Group Head Office Quebec, Canada E: Info@rotalec.com T : 514-341-3685 Manufacturing & International Sales USA Office Hertfordshire, England E: sales@moduloc-usa.com

DETECTOR COIL CONFIGURATIONS There are three types of detector coil configurations available which in turn are manufactured in various sizes to accommodate client’s specific requirements. Where metal transfer systems such as walking beams present, the Detector can be shielded from this by securing in an open top metal box. Coils may be mounted into roller table framework close to surrounding metalwork or rollers. For those areas where high ambient is expected (furnace entry tables and cooling beds) both PTFE search coils or all metal stainless loops are available. PERFORMANCE GUIDELINES...