Remote MD95100 Digital Hot Metal Detector
2Pages

MODULOC Control Systems REMOTE MD95100 DIGITAL HOT METAL DETECTOR • Fully Digital programmable “All-in-One” Design • Bar Display shows IR Signal relative to Trip Level • Programmable 270° to 1100 deg C Trip Level C • Operates from 80-240 VAC or 24 VDC supply. • Remote ½° x 25° F.O.V. precision slit Lens • High Temp lens ratings of 180° C. Both Cradle and Fast Reed Relay Outputs. Both NPN and PNP Transistor Outputs Remote Lens mounts Programmable response time from 2 to 200 ms Remote Self-check facility. General Description The MD95100 fully digital Remote “All-in-One” Hot Metal Detector incorporates a Bar Display showing the IR input signal relative to the pre-set trip level as a linear % as well programmable thresholds and response times via similar switch action. The MD95100 utilizes a modular digital Controller in protective mounting Cradle, flexible armored Optic Lead and Remote Lens.. One Controller used in conjunction with the Lens options available means one standard Controller can be used throughout the Mill. Now there is no need to stock a detector for each different trip level or requirement. The remote lens is impervious to water and steam built to withstand the harshest environments available. Used in conjunction with flexible armored optic lead, the Remote Lens provides a high level of optical accuracy. This robust lens with temperature ratings of 180° mount close to the hot product and includes air purging venting as an air purge with water cooling being available C The Remote lens incorporates filter to minimize sensitivity to extraneous light. For general tracking, spot lenses are commonly used. Where high accuracy required or the product deviates about the center line (i.e. Rod Mill) the ½° x 25° precision slit rectangular lens is the ideal lens. This lens is also highly suited to Strip Mills. Red LED’s - Hot product % IR Signal Relative to set Trip level & setting levels Blue LED - Power & Self Check Failure Yellow LED - Switching set LED Bar Display allows the user to clearly establish the amount of received IR both from the background metalwork and the bar being detected to thereby establish the correct trip level required. Yellow LED - Self check Confirmation One LED in this display also allows the user to align the Detector of a low energy source (torch), which normally would be insufficient to switch the Detector. Upper setting switch Controller shown out of Cradle Lower setting switch MODULOC Group Head Office Quebec, Canada E: Info@rotalec.com T : 514-341-3685 Adjustment of both the threshold and response time is also clearly defined by this bar display Technology - The Total Sensor Solution Manufacturing & International Sales Hertfordshire, England E: sales@moduloc-intl.com T: +44 (0) 845-873-6501

Dimensions Remote Electronic Controller Housing: Aluminum AL6, Oven baked black paint Housing Rating: IEC IP66, DIN, 89011 Weight w/o Cable: 1.7 Kg Connector: IP65 Plug/Socket Cable Length: 1.5 M Operational mode L.E.D.a Eectr ical Optic Connector Remote Lens: Precision Rectangular Slit: FOV: x 5°, x 15° Quick release MODULOC CONTROLS Optic Cables: Armored Stainless Sheath available in lengths from 2 meters to 15 meters in 1 meter lengths; rated 400°C. MODULOC Technology - The Total Sensor Solution Control Systems We reserve the right to alter specifications without prior notice....