MTM4-LF
5Pages

Product Data Sheet MODICD www.modico-systems.de Gear Motor MTM4-LF MTM4-LF is a hollow shaft gear motor. It can be used with DKC3 control box, DKS2 built-in spindle and DKP3 / DKP4 control panel, as a smooth and quiet solution for electric lifting table. - Main applications: Furniture - Input voltage: 24V DC - Max. speed at no load: 110rpm after gear reduction - Max. torque: 7Nm - Dual Hall sensors positioning feedback - Hollow shaft: Hexagon 6 mm diameter - Noise level: ^ 53dB - IP Protection level: IP30 - Color: Black - Power cord length: 1000 mm - Duty cycle: 10%, max. 2 min. continuous operation in 20 min. - Ambient operation temperature: 0°C ~ +45°C - Certified: CE marking, EMC Directive 2014/30/EU Option - Standard motor / High speed motor

Application example: gear motor control box built-in spindle hand control built-in spindle

Cable Plug L1-type or L3-type minifit plug Data 2 Note: Connect Pin (M +) to “ +” & Pin (M -) to “ -“ of DC power, the motor will turn counterclockwise. clockwise direction Counterclockwise

Power cord length 1: 1000 mm straight MTM4-LF - www.modico-systems.de Terms of Use The user is responsible for application suitability of Modico products. As ongoing improvement process continues, products listed on the Modico website are subject to change without prior notice. Modico reserves the right to terminate the sales or remove any product displayed on the website, or listed in its catalogues.