Technical Summary of Spindle Models and Specifications

1. Spindle Models and Types

The document lists various spindle models primarily categorized into two types: ACME and Ball Screw. The models include RM10, VM 53, RM 10S, RM 12, RM 16, RJ 5, UM 20, UM 12, UM 10, UM 3, and UM 36.

2. Load Specifications

Each spindle model is associated with dynamic load and maximum static load parameters, although specific numerical values are not provided in the excerpt. These loads are critical for understanding the mechanical limits and performance capabilities of each spindle type.

3. Performance Parameters

Key performance parameters mentioned include maximum speed (measured in mm/s), voltage (V), and maximum current (A). These parameters define the operational limits and electrical requirements for each spindle model.

4. Additional Features and Components

The document references signal limit switches and clutches, which are important for controlling spindle operation and ensuring safety. The IP (Ingress Protection) level is also noted, indicating the degree of protection against dust and water ingress.

5. Manufacturer and Product Information

The spindles and drives are associated with Modico Systems, with a reference to their website for further product details. A disclaimer about errors and omissions is included, suggesting that the data may be subject to change or verification.

Summary of Critical Information

• Spindle types: ACME and Ball Screw
• Models: RM10, VM 53, RM 10S, RM 12, RM 16, RJ 5, UM 20, UM 12, UM 10, UM 3, UM 36
• Key parameters: dynamic load, max static load, max speed (mm/s), voltage (V), max current (A)
• Control components: signal limit switch, clutch
• Protection rating: IP level
• Manufacturer: Modico Systems (www.modico-systems.de)