portable valve actuators BATTERY POWERED PORTABLE VALVE ACTUATORS REDUCTION RATIO MC89 BATTERIES AND ChARgERS LAyOUT Batteries technical data 1 Charger technical data BATTERY POWERED PORTABLE VALVE ACTUATORS *Autonomy measured at 50% of the maximum load The main power connection kit (ref BAT147) connects any main power plug to the actuator (in place of the battery) and provides an unlimited autonomy. SPEED CONTROLER & ELECTRONIC TORQUE LIMITER (See details on page 22) Although it is super light and compact, the MC89 Portable Valves Actuator delivers a 850 Nm (630 Ib.ft) maximum torque. This makes it the perfect tool for any « Easy » or « Standard » duty job, for any valve type, indoor or outdoor, with a great autonomy. Its two 18V Lithium-Ion batteries allow to use it continuously during up to one hour. For an even more intensive usage, use the main power connection kit that plugs on the actuator just like a battery and provides an unlimited autonomy. Designed for any type of operation, the MC89 comes with 3 models only that cover a 0 to 169 rpm speed range and a 850 Nm maximum torque. No need to say that even the most stubborn valves can be operated! No worry though, the integrated electronic torque limiter will easily prevent any damages for your valve or the tool itself. Ingress protection marking : IP20 equivalent Watt -► Horse power Newton meter -► Foot pound Millimeter -► inch Kv -► Cv Bar -► pound / square inch Normo liter / minute -► Standard cube feet / minute Kilogramme -► Pound The MC89 comes with an built-in speed control and torque limiter electronic system for an optimal people and material protection as well as a perfect adaptation to different constraints and environments. By adjusting the speed control trigger (4 positions) and the max torque scroll wheel (13 po Check the technical data sheet to see which options and accessories are capable of withstanding the torque created by the actuator ! * Warning! The maximum acceptable torque for the BJH01 is 600 Nm (440 lb.ft). Do not use the BJH01 if the torque required is higher than 600 Nm (440 lb.ft), use the torque limiter to limit the input torque to 150 Nm (110 lb.ft) (see stickers on the actuator and table hereafter). * Warning! The maximum acceptable torque for the BJH02 is 1000 Nm (740 lb.ft). Do not use the BJH02 if the torque required is higher than 1000 Nm (740 lb.ft), use the torque limiter to limit the input torque to 330 Nm (240 lb.ft) (see stickers on the actuator and table hereafter). * Warning! The maximum acceptable torque for the TM004 is 600 Nm (440 lb.ft). Do not use the TM004 if the torque required is higher than 600 Nm (440 lb.ft), use the torque limiter to limit the input torque to 160 Nm (110 lb.ft) (see table (p.22). For your comfort and safety, please carefully read the instruction manual before using the portable valve actuator.