US Office: Tel: 800.648.2800 or +1.847.671.6690 UK Office: Tel: (+44) 1543 459 555 www.mobilemark.com antenna solutions Magnet Mount Antennas WiFi, 2.4 & 2.4/4.9-6 GHz • Single band for 2.4 GHz, dual band models for 2.4-2.5 & 4.9 - 6 GHz • Built-in ground plane improves high frequency performance IMAG5 • Low profile, powerful magnet securely holds antenna Mobile Mark’s high frequency Magnet Mount antennas are useful for many applications including surveillance work, 2.4 WiFi/ISM, and other high frequency applications. Their unique design features allow them to overcome many of the problems normally associated with higher frequency systems. The IMAG Series mag-mounts have a ground plane at the feedpoint. This design overcomes the typical ground decoupling that occurs at the higher frequencies. and can also be used for public safety 4.9 GHz and DSRC 5.9. It is typically supplied with an SMA plug connector, others are available. A steel surface (but not stainless steel) will provide best contact with the powerful magnet. All units are supplied with a choice of RF connectors. Standard cable supplied is low loss-195, which has excellent electrical characteristics. Because the IMAG antennas have their own built-in ground plane but will require a metal surface to be mounted. Available in either a unity gain (0 dBi) or 5 dBi. Model # Gain Frequency The IMAG Series are very small in design and appearance. A powerful mini magnet holds the antenna securely at all times. The 3” round (76 mm) integral ground plane on the IMAG5 can serve as a removal handle. The low profile 5 dBi whip with tight winding phasing coil reduces potential whistling noise. Available in WHT-White or BLK-Black The MGD-2400/5500 antenna operates on WiFi 2.4 & 5 GHz Specifications Frequency: See above Gain: See above VSWR: 2:1 over band Impedance: 50 Ohm nominal Maximum Power: 10 Watts Operating Temp: -40o to +85o C White or black ASA plastic IMAG Whip: 302 stainless steel Cable: 10 feet (3 meters) of LL-195 Connector: SMA Plug (Male) standard Antenna Height: IMAG5 series 4 7/8 inches (124 mm) Shock & Vibration: MGD Size: 1.9” High x 3.4” Diameter (48 mm x 86 mm) IMAG Mount: ASA plastic & metal Made in the USA Specifications subject to change without notic