Cable Assemblies & Connectors
1Pages

{{requestButtons}}

Catalog excerpts

Cable Assemblies & Connectors - 1

US Office: Tel: 800.648.2800 or +1.847.671.6690 UK Office: Tel: (+44) 1543 459 555 www.mobilemark.com antenna solutions Cable Assemblies & Connectors • Custom RF cable assemblies built to order • Provides extension capability to standard antennas configurations Custom Coax Cable Assemblies • Quality low loss cable LMR-400 is suitable for long runs & higher frequency applications. Approximately 0.405” diameter (10 mm), it might be too large for some mobile installs, but is perfect for every base station transmitter or access point. Longer lead times may apply. Mobile Mark manufactures custom cable assemblies. All standard cable assemblies/ connectors are 50 Ohm. Standard production lead times are typically 2 weeks. Longer lead times may apply to some. RG-174 is a very small (approx. 0.1”/2.5 mm) flexible cable best suited for mobile/portable applications up to 1900 MHz. LMR-600 is the lowest loss cable we offer. It is a premium low It can be used in short runs up to 2.7 GHz. For miniature sized loss cable. It is suitable for base station installations where connectors it has the widest options available. the antenna may be mounted on a tower with long runs of cable. LMR-100A is the low loss alternative for RG-174. It has the same size diameter (0.1 inch or 2.5 mm) and can be used with the same range of connectors. The cable is well shielded but Model Configurator is still flexible and easy to handle. CA / Cable Length in Inches RG-58 is the work horse cable and is suitable for applications up to 2.7 GHz. It is best suited for cable runs under approxiCable Type mately 20ft (6 meters). End Connector 1 LL-195 is the same size cable as RG-58, and uses the same End Connector 2 size connectors, with the added feature of lower cable losses. Low Loss-195 would be suitable for cable runs over 15 ft (4.5 Example: CA120/195-CC meters) or in high frequency applications up to 6 GHz. This is Cable Options: Connector Options: our standard cable for applications above 2.5 GHz. Code Cable Code Connector 174 RG-174 C SMA Plug LMR-195FR is a non-halogen (non-toxic), low smoke, fire 100 LMR-100A V SMA Jack retardant cable. It has the same diameter as LL-195, can be fitted with the same variety of connectors, and has the same 58 RG-58 X N Plug cable loss. 195 LL-195 Y N Jack TNC JPlug LMR-240 is a lower loss cable than LL-195 and best suited for 195FR LMR-195FR A 240 LMR-240 W TNC Jack longer cable runs from 20 ft - 50 ft (6 meters - 15 meters) as well as for higher frequency applications up to 6 GHz or more. 400 LMR-400 600 LMR-600 (Other Configurations available.) Cable Type Loss Per ft. at Loss Per ft. at Loss Per ft. at 900 MHz 2000 MHz 2500 MHz Note: Loss per ft is equivalent to loss per 30 cm. Specifications subject to change without notice (0

Open the catalog to page 1

All Mobile Mark catalogs and technical brochures

  1. BSLLUMNT1-2

    1 Pages

  2. BKT2

    1 Pages

  3. BKT1 MOUNT

    1 Pages

  4. RFID

    4 Pages