Catalogs >
MOBATIME Swiss Time Systems >
Network Master clock - DTS 4801

Network Master clock - DTS 4801
4Pages

Catalog excerpts

□ SWISS TIME SYSTEMS NETWORK MASTER CLOCK SERIES DTS 480X.MASTERCLOCK The DTS 480x.master clock was developed especially for network environments. It is able to control conventional impulse clocks, self-setting MOBALine, DCF active or IRIG-B/AFNOR slave clocks and is used as an NTP time reference (time server) for computer systems and network clocks.

Open the catalog to page 1

HIGHLIGHTS CLOCK LINE OUTPUTS TIME SOURCE The DTS 480x series master clocks provide different types of clock lines. They are able to control self-setting MOBALine/IRIG-B/AFNOR or serial synchronized clocks as well as conventional impulse clocks. The DTS 480x.masterclock can be synchronized by a time signal receiver (DCF 4500 or GNSS 4500) and/or by NTP time servers (LAN/Internet). DTS 4801: x MOBALine/impulse/DCF active 1 1x serial DTS 4802: 2x MOBALine/impulse/DCF active DTS 4803: x MOBALine/impulse/DCF active 1 1x AFNOR/IRIG-B 1x serial DTS 4806: 6x MOBALine/impulse/DCF active The DTS...

Open the catalog to page 2

TECHNICAL DATA MECHANICAL DATA AND ENVIRONMENT General data Dimensions: DTS 4801/4802/4803: 483 x 44 x 125 mm (19", 1U) DTS 4806: 483 x 44 x 224 mm (19", 1U) Weight: DTS 4801/4802/4803: 1.35 kg DTS 4806 Standard: 3.5 kg DTS 4806 Extended: 4 kg Housing material: Stainless steel Protection degree: IP 20 Operating temperature: 0-50 °C Operating humidity: 10-90 % relative, no condensation Power supply: DTS 4801/4802/4803: 90-240 VAC or 24-28 VDC, 1.5 A DTS 4806: 100-240 VAC or 24-72 VDC, 6.3 A STANDARDS Conformity The DTS 480x.masterclock conforms to the following agency approvals1: CE, CB,...

Open the catalog to page 3

DTS 4801/4802/4803 17 @ |TT| |12| |]7 Status LEDs | Power (green), alarm (red), synchronization (green) Terminal | RS232 interface for local management, D-Sub 9 connector 1^ Alarm input (4x) | 8-pin terminal Display button DCF output Slave clock output 1 Slave clock output 2 Input for radio receiver with current loop output (e.g. GNSS 4500, DCF 4500) Impulse/DCF MOBALine/impulse/DCF active DTS 4801: not used DTS 4802: MOBALine/impulse/ DCF active For display illumination and paging through information displays Mains power supply1 C14 plug DC output Alarm relay 90-240 VAC, 50/60 Hz or...

Open the catalog to page 4

Network Master clock - DTS 4801 4Pages

Catalog excerpts

All MOBATIME Swiss Time Systems catalogs and technical brochures

Network Master clock - DTS 4801
4Pages