Catalogs >
MOBATIME Swiss Time Systems >
DTS 4210 timecenter

DTS 4210 timecenter
4Pages

Catalog excerpts

□ SWISS TIME SYSTEMS HIGH-PRECISION TIME SERVER, GRANDMASTER & PRTC DTS 4210.TIMECENTER The DTS 4210.timecenter is a combined time distribution and synchronization device with up to 16 network ports (IPv4/IPv6). With its high-precision and intelligent concept for redundant operation, it offers a high degree of reliability and availability.

Open the catalog to page 1

HIGHLIGHTS PTP GRANDMASTER AND PRTC GNSS RECEIVER The DTS 4210 is a primary reference time clock (PRTC) and PTP grandmaster according to IEEE 1588-2008 / PTPv2, with IEEE 15882019 / PTPv2.1 compability, for the synchronization of highly accurate clients. Usable for telecom (e.g. LTE), energy (e.g. smart grid), automation etc. The DTS 4210 can receive all GNSS L1 systems (GPS+QZSS/SBAS, Galileo, GLONASS, BeiDou), guaranteeing utmost accuracy and availability. HIGH-PERFORMANCE NTP SERVER The DTS 4210 can reply to more than 20‘000 NTP and SNTP requests per second (up to 600‘000 clients...

Open the catalog to page 2

TECHNICAL DATA OSCILLATOR Variants 1 After 30 days of synchronization; for more detail, see product manual 2Typically fulfilled while GNSS synchronization is active 3 For more information, see product manual MECHANICAL DATA AND ENVIRONMENT General data Dimensions: 483 x 178 x 190 mm (19", 4U) Weight: 5.6 kg Housing material: Stainless steel Protection degree: IP 20 Operating temperature: 0-50 °C Operating humidity: 10-90 % relative, no condensation Power supply: 2x 90-240 VAC or 80-240 VDC, 0.5 A; 2x 24-28 VDC, 2 A (redundant, supervised) STANDARDS Conformity The DTS 4210.timecenter...

Open the catalog to page 3

Power (green), alarm (red), synchronization (green) RS232 interface for local management, D-Sub 9 connector For firmware updates and log files LCD, 2 lines with up to 20 characters (with backlight) For status, time and network configuration info Display button For display illumination and paging through information displays output (4x) Frequency input (4x) Pulse output (4x) Mains power supply (2x)1 IRIG digital output (4x)2 Alarm contact Normally closed Max. load: 30 W (30 VDC or 1 A) / 60 VA (60 VAC or 1 A) DCF current loop input for the connection of a GNSS 4500 DCF output, current loop...

Open the catalog to page 4

DTS 4210 timecenter 4Pages

Catalog excerpts

All MOBATIME Swiss Time Systems catalogs and technical brochures

DTS 4210 timecenter
4Pages