Catalogs >
MOBATIME Swiss Time Systems >
DTS 4160 Grandmaster

DTS 4160 Grandmaster
4Pages

Catalog excerpts

□ SWISS TIME SYSTEMS HIGH-PRECISION TIME SERVER, GRANDMASTER & PRTC DTS 4160.GRANDMASTER The DTS 4160.grandmaster is a combined time distribution and synchronization device with up to 4 network ports (IPv4/IPv6). With its high-precision and intelligent concept for redundant operation, it offers a high degree of reliability and availability.

Open the catalog to page 1

HIGHLIGHTS PTP GRANDMASTER AND PRTC HIGH ACCURACY The DTS 4160 is a primary reference time clock (PRTC) and PTP grandmaster according to IEEE 1588-2008 / PTPv2, with IEEE 15882019 / PTPv2.1 compability, for the synchronization of highly accurate clients. Usable for telecom (e.g. LTE), energy (e.g. smart grid), automation etc. The DTS 4160 can receive all GNSS signals (GPS, Galileo, GLONASS, BeiDou), guaranteeing utmost accuracy and availability. For GNSS security, multiple constellations can be used in parallel. HIGH-PERFORMANCE NTP SERVER The DTS 4160 can reply to more than 10‘000 NTP and...

Open the catalog to page 2

TECHNICAL DATA REFERENCE SIGNAL INPUTS OSCILLATOR OPTIONS 1x GNSS RF input (for GNSS antenna) to internal GNSS receiver, 72 channels, tracking sensitivity -165 dBm 1x connection to second DTS 4160.grandmaster (SFP) – redundant link 1x PTP (from other PTP grandmaster, as PTP slave) 1x DCF current loop (e.g. GNSS 4500) 1x E1 (for holdover enhancement only) REFERENCE SIGNAL OUTPUTS - NETWORK After 30 days of synchronization; for more detail, see product manual 2 Typically fulfilled while GNSS synchronization is active 3 For more information, see product manual 1 MECHANICAL DATA AND ENVIRONMENT...

Open the catalog to page 3

Status LEDs Power (green), alarm (red), synchronization (green) Terminal RS232 interface for local management, D-Sub 9 connector For firmware updates and log files LCD, 2 lines with up For status, time and network to 20 characters (with configuration info backlight) For display illumination and paging through information displays IRIG digital output2 2-pin terminal Serial output (2x) DCF In/Out 10-pin terminal DCF current loop input for the connection of a GNSS 4500 7 DC power supply (2x)1 2-pin terminals DCF output, current loop passive Normally closed Max. load: 30 W (30 VDC or 1 A) / 60...

Open the catalog to page 4

DTS 4160 Grandmaster 4Pages

Catalog excerpts

All MOBATIME Swiss Time Systems catalogs and technical brochures

DTS 4160 Grandmaster
4Pages