MLT, it’s solutions for heavy and duty belts, tools, teghn^lweltsi User ManualMinimal vibration, maximum productivityReduce the installation time with optimal assurance that it is accurate! Unparalleled comfort thanks to its vibration damping, oscillatory system and ergonomic handle The hammer of the MLT Quick Driver is designed to minimize any vibration, while maintaining high performance of the tool. It is unique in that it incorporates revolutionary ergonomic benefits. Its weight is less than 1.3 kg. The pistol grip is equipped with an anti-vibration system and a rubber coating. Its position is adjustable according to the positioning of the body in relation to the work area: The user then has a comfortable use, without extra force. Adjustable power The MLT Quick Driver is adjustable, allowing the user to precisely match the required power to the selected belt and fastener. Versatility The MLT teams have developed punches that allow you to use two types of fasteners for light duty belts: • The Self-Lock® but also other fasteners:the MLT Quick Driver can be combined with many of the tools on the market. MLT Quick Driver - Fully-equipped and delivered in a carrying caseTechnical characteristics Advantages Ref" 4700063 Weight equipped I Optimal and incomparable comfort when using Versatility Compact and light weight Compatible with other installation tools on the market Pressure adjustment depending on the fastener* ZI du Clos Marquet Rue Michel Rondet - CS 70059 42 400 St Chamond France WARNING To reduce the risk of injury, the use, installation, maintenance, changes to accessories or any work near this tool should be performed by a person who has read and understood the instructions before performing the task. DO NOT DISCARD - GIVE TO THE USER * given as an indication: may vary depending on the type of belt

7.Slide the steel plate under the MR fastener and hammer the staple with the steel head hammer to close the Mini Record. Repeat the operation on all the fasteners. Remove the spindle 8.Take opposite belt side. Align it with the side already installed Mini Record fastener. Mark the fastener position and alignment and install as instructed from step 2. Repeat from step 2 5.Connect the MLT Quick Driver to your compressed air device (you will first need to assemble the special Self-Lock® punch and the head on the MLT Quick Driver). On the FRL (Filtration, Regulation, Lubrication), set the pressure...