*mydirectindustry

G 2000 Series

1 / 1 PageView full catalog

G 2000 Series

Product catalog summary

Specifications:

Belt Thickness: G 2002: 7.5 to 15 mm, G 2003: 10 to 18 mm, G 3003: 14 to 20 mm.
Minimum Pulley Diameter: G 2002: 250 mm, G 2003 and G 3003: 500 mm.
Maximum Belt Strength: G 2002: 1,400 N/mm, G 2003 and G 3003: 3,500 N/mm.
Material: Fasteners made of high tensile plated carbon steel (HLE) with pre-mounted staples of carbon steel. G 3003 uses high tensile galvanized coated steel (HTS). Hinge material includes stainless steel bare and polyamide covered armoured cable.

Installation:

Utilizes an open-ended hammer tool for continuous lacing of wider belts or a hydraulic installation press.
Packaging includes a box with 2 strips for belt widths up to 1,600 mm, without hinge material.

Tools:

Standard pneumatic tool and hammer tool for the G2000 series.

Additional Features:

G 3003 includes pre-assembled staples, reinforced loop, and chamfered edges for belt cleaner compatibility.
Staples are protected after skiving the belt.

Additional Information:

For more details, visit the website: www.mlt-lacing.com
Product is patented and made in France.

Catalog excerpts

Mining application Installation Packaging Fastener made of high tensile plated steel (HLE) with pre-mounted staples made of carbon steel. Hinge material Fastener made of high tensile plated carbon steel (HLE) with pre-mounted staples made of carbon steel HLE Belt thickness, mm Min pulley Ø, mm Max. belt strength, N/mm High tensile galvanized coated steel (HTS). - Stainless steel bare armoured cable - Stainless steel polyamide covered armoured cable Using an open ended hammer tool, which allows continuous lacing of Hammer tool wider belts or a hydraulic installation press. Box with 2 strips for requested belt width up to 1,600 mm (62“) in one piece (longer on demand), without hinge material (separately). Pre assembled staples Reinforced loop Chamfered edges : belt cleaners friendly Staples are protected after skiving the belt More information ? Please check our website I N S TA L L AT I O N T O O L S Standard pneumatic tool Hammer tool

Open the catalog to page 1

All MLT MINET LACING TECHNOLOGY SA catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list