*mydirectindustry

MLP-10

Product catalog summary

Overview: The MLP-10 is a turnkey laser perforation system designed for offline perforation of single bobbins of cigarette tipping paper. It integrates advanced technology to ensure high-quality perforation with minimal deviation, offering reliability and efficiency.

System Capabilities: The MLP-10 can perforate up to 8 rows, with a maximum of 4 rows per perforation zone, achieving up to 40,000 holes per second at a web speed of 600 meters per minute. The system supports a maximum web width of 100 mm.

Rewinder Specifications:

Maximum bobbin diameter: 450 mm
Paper length unwind: up to 3500 m
Maximum bobbin/paper width: 100 mm
Ramp-up time: 0 to 600 m/min in under 3 seconds
Maximum winding speed: 600 m/min
Paper weight: 35 to 45 grams per square meter
Web guide: 1 optical edge sensor
No slitting operations for single bobbin
Base plate: Solid steel for stability

Micro Perforator Features:

Utilizes patented Vario-Polygon System
Rotating speed: Up to 12,000 RPM
Optical pulse frequency: Up to 40,000 holes/sec, 10,000 Hz per row
Hole density: 5 to 30 holes/cm
Typical porosity: 50 to over 100 Coresta Units/row
Adjustable hole diameter: 50 to 150 µm

Focusing Heads:

Maximum of 8 perforation heads
Heads can move across the entire web
Adjustable focusing lens with 0.01 mm resolution
Individual shutter for each head

CO2 Laser Source:

Wavelength: 10.6 µm
Laser power: 200 Watt or 400 Watt
Optimized power stabilization

Chiller:

Cooling options: "Water-to-Air" or "Water-to-Water"
Temperature regulation: +/- 0.5°C

Exhaust Dust Filter System: Efficiently removes and filters debris from the perforation process.

Catalog excerpts

MLP-10 Laser Perforation for Single Bobbin of Cigarette Tipping Paper Picture shows the turnkey MLP-10 system including the Micro Perforator, the Rewinder, the CO2- Laser Source. The MLP-10 System is a turnkey Laser Perforator Systems which offers highly attractive state-ofthe-art technology for offline perforation of single bobbin of cigarette tipping paper. The MLP-10 System perforates a maximum of 8 rows (max. 4 rows per perforation zone) and up to 40.000 holes/second at a maximum web speed of 600 m/min. The maximum web width is 100 mm. The MLP-10 System perforates an extremely consistent hole-to-hole quality which results into a minimum standard deviation giving the MLP-10 System the highest reliability.

Open the catalog to page 1

Laser ExcellencMicro Laser TechTechnical details of the MLP-10 System: 450 mm max. 3500 m max. 100 mm 0 - 600 m/min below 3 sec. 600 m/min 35 to 45 gr./sqm. 1 optical edge sensor no slitting operations for single bobbin solid steel base plate for perfect long term stability Rewinder: • Max. bobbin diameter: • Paper length unwind: • Max. bobbin / paper width: • Ramp up time: • Max. winding speed: • Printed and un-printed paper: • Web guide: • Slitter: • Base plate: Micro Perforator: Based on patented Vario-Polygon System Rotating speed: Max. optical pulse frequenz: Hole density: Typ. Porosity: Hole...

Open the catalog to page 2

All MLT - Micro Laser Technology GmbH catalogs and technical brochures

MLP-50 TWIN
2 Pages
mlp-50
2 Pages
MLP-FP
2 Pages
MLM - Serie
2 Pages