E-Drive: available as option SF 700 High-performance cleaning and filter cart for the cleaning of cooling lubricants, cutting oils and varnishing water. SF 700 Capacity Main tank Swarf absorber Electrical connection Suction height (stat.) Suction capacity Noise level Connected load Housing Compact construction with self-supporting Solid-weldingconstruction of 3 mm steel sheet Outside- and inside double coating, 2-K-varnish (NCS-S 2010-R70B) Suction hose Length 4,5 m, Ø 50 mm, suction hose 0,8 m, flat nozzle 100 mm wide Nozzle-set Reducer Ø 36 mm, extension piece Ø 36 mm, length 440 mm, floor nozzle 400 mm wide, crevice nozzle Cleaning system High pressure pump for cleaning of the emulsion tank 400 V - 2,6 kW 8 m HP-hose, continuously adjustable lance nozzle 0-70 bar Evacuation Centrifugal pump, 400 V – 0,55 kW Evacuation hose Length 5 m, Ø 32 mm, with ball cock at the hose-end Vacuum belt filter To the separation of splinters and particles Fleece-length 100 m

Components SF 700: Swarf chute complete Useable as an independent industrial exhauster 3 m connection hose to the main-unit with to 2 C couplers Electrical connection 16-A-Cekon-connector with 10 m current cable 5-pin integrated phase inverter Options - Drawbar (The whole length increases by 250 mm.) - Cleaning hose special Length 4 m (For to heavy accessible places, which can not reached with the rigid lance, e.g. under the swarf absorber. - Cleaning opening at the rear Dimensions 420 x 150 mm (We recommend this cleaning opening for the unproblematic cleaning of the system) - Cleaning door at...