SF 500 S High-performance suction and filter cart for cooling lubricants, washing-mediums and cutting oils. SF 500 S Capacity Main tank Pure tank Swarf container Dimensions Length Separator capacity Separation particle size Electrical connection Connected load Components: Housing Welded-construction with 3 mm steel sheet Outside- and inside double coating 2-K-varnish (RAL 5014 pigeon blue) Switch cabinet, rear hood and swarf-receiver-tank 2-Kvarnish (RAL CS201 R70B grey) Vacuum-belt-filter To the coarse separation of swarfs and particles Fleece lenght 100 m Suction height (stat.) Suction capacity Noise level Suction hoses Length 4,5 m, Ø 50 mm, suction tube 0,8 m, Broad nozzle 100 mm broad For bypass operation: length 4 m, Ø 25 mm with a D-coupler, installed Nozzle set Reducer Ø 36 mm, extension piece Length 440 mm, Ø 36mm Floor nozzle 400 mm broad, crevice nozzle Separator-system Eccentric screw pump: transport of the prepurified medium to the separator Solid-collecting 3-phases-disk separator: Capacity 500 l/h Medium-contacted separator-parts made auf stainless steel

systems www.mkr-metzger.de Emptying system Vertical inline block pump for leading back the medium from the main or pure tank 3 m emptying hose, 0 25 mm with a Cleaning system High pressure pump to the cleaning of the emulsions- 400 V -2,6 kW, steplessly adjustable lance nozzle (We recommend this cleaning opening for the problem-free cleaning of the system.) - Cleaning door at the rear Breadth: tank-breadth, height: 500 mm (We recommend this cleaning opening for the problem-free cleaning of the system.) - Wheel set for extremely uneven ways - Float construction (surface exhaust) Swarf tank uncouplable...