Drawbar : available as option SF 1000 High-performance suction and filter cart for the cleaning of cooling lubricants, cutting oils and varnishing water SF 1000 Capacity Main tank Swarf absorber Electrical connection Suction height (stat.) Suction capacity Noise level Connected load Components: Housing Compact construction with self-supporting Solid-weldingconstruction of 3 mm steel sheet Outside- and inside double coating, 2-K-varnish (NCS-S 2010-R70B) Suction hose Length 4,5 m, Ø 50 mm, suction hose 0,8 m, flat nozzle 100 mm wide Nozzle-set Reducer Ø 36 mm, extension piece Ø 36 mm, length 440 mm, floor nozzle 400 mm wide, crevice nozzle Cleaning system High pressure pump for cleaning of the emulsion tank 400 V - 2,6 kW 8 m HP-hose, continuously adjustable lance nozzle 0-70 bar Evacuation Centrifugal pump, 400 V – 0,55 kW Evacuation hose Length 5 m, Ø 32 mm, with ball cock at the hose-end Vacuum belt filter To the separation of splinters and particles Fleece-length 100 m

Spaneschlucker kompl. als eigenstandiger Industriesauger einsetzbar, Electrical connection with 10 m current cable 5-pin integrated phase inverter (The whole length increases by 250 mm.) - Cleaning hose special (For to heavy accessible places, which can not reached with the rigid lance, e.g. under the swarf absorber. - Cleaning opening at the rear (We recommend this cleaning opening for the unproblematic cleaning of the system) - Cleaning door at the rear Breadth: Tank-breadth, height: 500 mm (We recommend this cleaning opening for the unproblematic cleaning of the system) - Wheel set for extremely...