SF 500 High-performance suction and filter cart for the cleaning of cooling lubricants, cutting oils and varnishing liquids System components: Capacity Main tank Swarf chute Electrical connection Housing Compact-construction with self-supporting solid welded structure of 3 mm sheet steel Out-and Inside coat of lacquer 2-K-lacquer (NCS-S 2010-R70B) Suction height (stat.) Suction capacity Noise level Connected load Suction hose Length 4,5 m, Ø 50 mm, suction tube 0,8 m, flat nozzle 100 mm wide Nozzle set Reducer Ø 36 mm, extension tube Ø 36 mm length 440 mm, floor nozzle 400 mm wide, crevice nozzle Cleaning system High pressure pump for cleaning of the emulsion tank 400 V – 2,6 kW 8 m HD-hose, infinitely adjustable lance nozzle 0-70 bar Evacuation Centrifugal pump, 400 V – 0,55 kW Evacuation hose Length 5 m, Ø 25mm with ball cock at the end of the hose Vacuum-belt-filter For the desposition of swarfs and particles Fleece-Length 100 m

Components SF 500: Swarf chute complete Useable as an independent industrial exhauster 3 m connection hose to the main-unit with to 2 C couplers Supply point 16-A-cekon-connector with 10 m current cable 5-pole integrated phase inverter Options - Trailer draw bar (The complete-length increases by 250 mm.) - Cleaning hose special Length 4 m (For difficulty-accessible places, which one can not be reached with the rigid lance, for example under the swarf chute.) - Cleaning opening at the rear Dimensions: 420 x 150 mm (We recommend this cleaning opening for the unproblematic cleaning of the unit.)...