OTC 350 Disk centrifuge for cooling lubricant, cutting oils and washingmedia OTC 350 Separator current Separation particle size Electrical connection Housing Welded construction of 3 mm sheet steel. Double out- and inside coat of lacquer 2-K-lacquer (NCS-S 2010-R70B) Suction height (stat.) Noise level Connected load Hoses Suction hose, Length 4 m, Ø 20 mm D-coupler at the end of the hose Recirculation hose cleaned medium Length 4 m, Ø 20 mm, type Armorvin - HNA Separator system Solid matter collecting 3-phases-disk separator Media-touched separator parts in special steel and red brass Feed pump Suction pump according to the side channel principle with flow regulating valve Motor power: 0,27 kW at 400 V 50 Hz Pre filter, as pump protection Single filter, special steel insert 350 µm Optionally different surface suction systems are available Documentation Operating manual, Electrical-connection-diagram Technical changes reserved Date of last review: 09/2007 Ausland/350-M-1 k/Datenblätter/Neue Datenblätter