OTC 350 VA Disk centrifuge for cooling lubricant, cutting oils and washingmedia OTC 350 VA Separator current Separation particle size Electrical connection Housing Welded construction of 3 mm sheet steel. Double out- and inside coat of lacquer 2-K-lacquer (NCS-S 2010-R70B) Suction height (stat.) Noise level Connected load Hoses Suction hose, Length 4 m, Ø 20 mm D-coupler at the end of the hose Recirculation hose cleaned medium Length 4 m, Ø 20 mm, type Armorvin - HNA Separator system Solid matter collecting 3-phases-disk separator Media-touched separator parts in special steel and red brass Feed pump Compressed-air diaphragm pump of PE or PTFE Pre filter, as pump protection Single filter, special steel insert 350 µm Optionally different surface suction systems are available Documentation Operating manual, Electrical-connection-diagram Technical changes reserved Date of last review: 03/2011 K:/Datenblätter/Neue Datenblätter Ausland/OTC 350 VA