SUBMERSIBLE LEVEL TRANSMITTERS BROCHURE EN 2.75 EXPERT BROCHURE 1401

OUTSTAN DING DU R AB ILIT Y AN D H IGH PR ECI S ION MJK level transmitters are designed for level measurement by immersion in open channels gutters, ground water wells, reservoirs and tanks - even in potentially dangerous sites. MJK level transmitters are robust and de2 signed to withstand hard impacts in slurries, wastewater and sludge. MJK level transmitters excel to the top of their category for their long lasting performance in wastewater treatment plants, pumping stations, waterworks and industrial plants. Over the many years of being installed around the world, MJK level transmitters are...

M J K H Y D R O S TAT I C T R A N S M I T T E R A R E U S E D E V E R Y W H E R E - even in some very harsh environments WASTEWATER For level measurement in tanks with sewage, storm flow basins, aeration tanks, sludge thickeners and have enough precision for level measurement for open channel flow measurement. DRINKING WATER Level measurement in water wells and tanks, level control in water towers, filter pools, ion exchangers and chemical mixing/precipitation tanks. GEO-TECHNICAL Level measurement in tunnels, mines and dewatering under larger buildings. INDUSTRIAL Measurement in all types of...

Our level transmitters have a sturdy design with housing in re-enforced plastic or stainless steel. Cables are insulated with PUR, and steel reinforced to achieve very high tensile strength. Sensing membranes are made with either ceramic or stainless steel. Outputs are analog two-wire 4-20 mA, voltage or digital Modbus RTU. Expert 700 Water Wells AISI 316L AISI 316L Outer diameter Ø 16 mm Analog 4-20 mA Application: Water Wells and Water Storage and Processing Housing: AISI 316L Diaphragm: AISI 316L Features: Outer diameter Ø 22 mm Output: Analog 4-20 mA, spænding eller Modbus Application: Water...

LEVEL TRANSMITTER LEVEL TRANSMITTER '^^HYDROSTATIC LEVEL TRANSMITTER 70 Application: Water Wells and Water Storage Application: Wastewater and process water Application: Drinking, waste and process water

Expert™ hydrostatic level transmitters Measuring ranges from Measurement principle Piezo resistive or capacitive ceramic measuring cell Temperature range Temperature Drift Temperature Operation Measuring range accuracy Output Signals Analogue 4-20 mA voltage or digital Modbus RTU Materials, house Materials membrane Acid proof steel or ceramic 99.9% pure AL2O3 Measuring cell seals Supply voltage 2 x 0,5 mm2, shieldedt (+ 5 x 0,15 mm2 programming contacts) Insulation PVC/PUR 12 m, or by request IP68, waterproof CE: EN50081-1, EN50082-1 ATEX: II 2G Ex ia IIC T6 (-20°C≤Ta≤40°C) II 2G Ex ia IIC T5...