Laboratory Mixers
8Pages

MIXING SYSTEMS AND COMPONENTS FOR PLANTS Mixing Division Laboratory Mixers

Quality and Innovation MIX PRODUCTS AND SOLUTIONS The laboratory mixer series was developed to focus on the needs of R&D laboratories, research institutes and small pilot plants. The main characteristics are: ✔ Versatility ✔ Easy disassembly and cleaning ✔ Repeatability of the results obtained and scale up of the process on industrial mixers ✔ Plug and play solution THE PRINCIPLE OF THE THREE-DIMENSIONAL MECHANICAL FLUIDISATION The working principle of the horizontal ploughshare-mixer is based on the “three-dimensional mechanical fluidisation” (with a centrifugal vortex) of products. This...

Technical features MX.0002-05 MODEL MXCM0002 MXCM0005 Load capacity (liters) MIN MAX 0,7 1,4 1,5 3 Load capacity (liters) MIN MAX 3,5 7 10 20 Load capacity (liters) MIN MAX 10 65 STANDARD - mixing chamber in AISI 304 - 1 loading/unloading port with safety block, manual rotation of the chamber according to the working phase - overhung rotor shaft with ploughshare tools - mechanical rotor shaft seal - removable chamber for easy cleaning with safety block - 1 cover reconstructing the shape of the mixing chamber - 1 container for loading/unloading of product - electric control panel with...

Tabletop Laboratoy Mixer 02-05 Laboratory mixer type MXC for BATCH production processes with ploughshare mixing tools. Possibility to remove the mixing chamber for a thorough cleaning. Polishing treatment on the inside of the chamber, shot blasting treatment on the outside. Internal chamber with welded ploughs, and polishing treatment Container for product feeding/unloading Closure plug for the feeding door Feeding / unloading door 1 - Mixing chamber with upward facing port, to feed the product from a container - Replace the container with a closure plug / chopper / liquid injection nozzle...

Laboratory Mixer 12-30 Laboratory mixer type MXC for BATCH production processes with ploughshare mixing tools. Polishing treatment on the inside of the chamber, shot blasting treatment on the outside. Internal chamber with welded ploughs, and polishing treatment Mixing chamber complete with heat exchanger on the Chopper cylindrical part (optional) Closure plug, with viewing glass and filter sleeve Unloading port with manual opening and safety grid Electromechanical control panel (standard) Tank for liquid injection (as an option) Accident-prevention electric lock Touch screen (optional) 5

Laboratory and Production Mixer 75 Laboratory mixer type MXC for BATCH production processes with ploughshare mixing tools. Polishing treatment on the inside of the chamber, shot blasting treatment on the outside. Front hatch with safety block Chopper and liquid injection Loading and inspection hatch with safety block Tank for liquid injection (optional) 1 Unloading port with pneumatic opening and safety grid Pneumatic control panel 6 Safety electro block Touch screen (optional)

Technical Data Sheets MX.0002 MX.0005 1-2 Door for product feeding/ unloading MX.0075 1 - Feeding door 2 - Unloading door 1 - Feeding door 2 - Unloading door ATEX AAAAA- NOTE: Height expressed in mm, if not specified otherwise. The company MIX reserves the right to make changes without prior notice. All sizes shown are approximate. The values are intended with tolerances resulting from normal production fluctuations. In special cases, and for precise values, our written confirmation is required.

MIXING SYSTEMS AND COMPONENTS FOR PLANTS QUALITY SERVICE TECHNOLOGY INNOVATION MIX S.r.l. - 41032 CAVEZZO (MO) - Via Volturno, 119/A - ITALY Tel. +39 0535.46577 - Fax +39 0535.46580 - info@mixitaly.com