Interception
20Pages

MIXING SYSTEMS AND COMPONENTS FOR PLANTS Technical data sheet Interception ATEX RANGE AVAILABLE SV/211

Butterfly Valve Combination table Identification N: Standard A: Atex II 2/3D Ex h IIIB T100°C Db/Dc X Shaft A2: Square drive shaft ISO 5211 C2: Splined drive shaft DIN 5482 K2: Extended square drive shaft ISO 5211 L2: Extended splined drive shaft DIN 5482 Fig.01 MATERIAL OF THE SEAL AND WORKING TEMPERATURES * Possibility of range -25°C / +230°C with specific construction solutions IL0945 applicable only for extended drive shaft versions and Viton seal ** Valve with Declaration of conformity for food contact according to Regulations (EC) n. 1935/2004 and 2023/2006 Seal A: Standard powder...

Dimensions.-SVAH...A2... / .-SVAH...K2... Square drive shaft Extended square drive shaft

Splined drive shaft Extended splined drive shaft

SLEEVE FOR FLEXIBLE CONNECTION - SFU Construction material 2 = Stainless steel AISI 304 8 = Aluminium 0C INTERNAL ASSEMBLY CODE MIX KFT Flange Nominal diameter Construction material 1 = Carbon steel 2 = Stainless steel AISI 304

Actuators Butterfly Valve Manual actuator Size22 - 28 RAM C INTERNAL ASSEMBLY CODE MIX Size Qty of limit switches mod. FR515 22 - 28 2: limit switch Geared motor actuator Only available for NON-ATEX version The torque value refers to the available starting torque for a maximum duration of 2”

RAP C Double acting pneumatic actuator Cylinder diameter 080 - 100 - 125 Cover A: high B: low Identification N: Standard A: Atex II 3D Ex h IIIB T100°C Dc X Shaft coupling S: ISO 5211 square drive coupling X: DIN 5482 splined drive coupling

* only available for A-RAP...XB /: Standard (without silencers) C = in line A: ATEX (including 2 silencers) D = namur Actuator Type Monostabile electro-valve - 5 ways - spring device

Voltage Frequency SOLENOID COIL ATEX* COMBINATION TABLE * suitable for conductive and non-conductive powders

Slide Valves Combination table Handling screw Costruction material 1: Carbon steel 2: Stainless steel AISI 304 Classification MSD H: partly finished machinery E: not machinery Identification N: Standard A: ATEX II 2/3D Ex h IIIB T135°C Db/Dc X (marking for version with motor M) T: Version suitable for explosive atmosphere (for versions with bare shaft A and handwheel V) ACTUATOR COMBINATION TABLE COMBINATION TABLE N: Standard A: ATEX II 2/3D Ex h IIIB T135°C Db/Dc X Pneumatic cylinder Construction material 1: Carbon steel 2: Stainless steel AISI 304 COMBINATION TALBE

Dimensions .-SGA...A.A.. / .-SGA...A.V.. / .-SGA...A.M.. Bare shaft Manual control Motor Control * Duration in seconds for one single opening or closing 11

Identification /: Standard (without silencers) A: Atex (without silencers) II 2G Ex h IIB T5 Gb II 2D Ex h IIIC T100°C Db Monostabile electro-valve 5 ways - spring deviceSize Type 8 = 1/8" C = Standard SOLENOID COIL COMBINATION TABLE Solenoid Voltage Frequency coil and 024 = 24 V DC: Direct current DC SOLENOID COIL ATEX* * suitable for conductive and non-conductive powders

Accessories LIMIT SWITCH IP67 LIMIT SWITCH ATEX IP67 Dimension R1 (magnetic) = SGB 150÷800 (20V÷220V AC) (20V÷220V DC) P (inductive) = SGA 150 (20V÷220V AC) NO Q (inductive) = SGA 200÷800 (20V-220V AC) NO S (inductive) = SGA 150 (10V÷30V D.C.) PNP-NO T (inductive) = SGA 200÷800 (10V÷30V DC) PNP-NO Dimension R (magnetic) = A-SGB 150÷800 (10V÷110V AC / DC) II 3G Ex nC IIC T4 Gc / II 3D Ex tc IIIC 110°C Dc S (inductive) = A-SGA / A-SGB 150 (20V DC) PNP-NO II 3G Ex nAc IIC T6 X / II 3D Ex tc IIIC T80°C X T (inductive) = A-SGA / A-SGB 150 200÷800 (24V DC) PNP-NO II 3G Ex nAc IIC T6 X / II 3D Ex...

Pinch Valve Combination table Material for the seal Anti-abrasive rubber DATA SHEET Working pressure: max. 3 bar Control pressure: 2 bar higher than the working pressure Temperature: min. -10°C / max. +80°C ELECTRO-VALVEKEC 51 8 7 Monostabile electro-valve Dimension 5 ways - spring device 8 = 1/8" Voltage Frequency COMBINATION TABLE

ROUND FLANGE FOR SMA This flange is welded on the inlet feeding pipe of silo and the pinch valve is bolted to this flange. KFT D Round flange Nominal diameter D = UNI PN10 Construction material 080 = 80 mm 1 = Carbon steel 100 = 100 mm 2 = Stainless steel AISI 304 It is used to control the air circuit of the pinch valve's control solenoid valve. It controls the compressed air pressure, making sure that it is higher than the minimum set point of 4 bar SSP 2 4 A Voltage Equipment 24 - 230V AC Standard with cable Pressure switch Type of contact NC/NO This unit, supplied together with a gauge...

Valves for Silos Combination table SV Connection flange Q: Squared connection made of carbon steel T: Round connection made of carbon steel Splined drive shaft DIN 5482 Material of body and pivoting 1: Carbon steel painted RAL 9006 Standard powder seal in atmospheric pressure Material of seal 1: NBR quality seal for continuos operation (- 15°C+100°C)

INTERCEPTION SYSTEMS AND COMPONENTS FOR PLANTS QUALITY SERVICE TECHNOLOGY INNOVATION MIX S.r.l. - 41032 CAVEZZO (MO) - Via Volturno, 119/A - ITALY Tel. +39 0535.46577 - Fax +39 0535.46580 - info@mixitaly.com 20