Dust collectors
8Pages

MIXING SYSTEMS AND COMPONENTS FOR PLANTS Filtering Division Dust collectors ATEX-RATED PRODUCTS AVAILABLE CF/201

Quality and Innovation AIR POLLUTION Air pollution, with dusts emitted into the atmosphere, causes detrimental effects to people and things. SOCIAL ENGAGEMENT Technological progress and environmental protection, job and health, economy and ecology must proceed hand in hand; a need for the present, and a commitment for the next future. MIX SRL PRODUCTS AND SOLUTIONS Mix srl has designed a complete range of dust collectors, with round or rectangular shape; good working solutions and different filtering surfaces, up to 400 sq. m. and more. DUST COLLECTORS WITH ROUND SHAPE

Purpose Dust collectors are designed to separate dusts conveyed by a dusty air flow. Powders must be kept outside the filtering element, while the fluid passes through the filter cloth and becomes de-dusted. Dusts which remain inside the dust collector fall inside a container, set under the dust collector; while the clean air is released into the atmosphere. The separation of dust from air is never complete: the filter’s task is to reduce the dust rate, and to bring it back to the levels permitted by laws. Filtered air released in the atmosphere Cleaning elements Sequential timer Filter’s...

Application areas Our Company is specialized in design and manufacture of dust collectors for the applications below: FAN-ASSISTED DUST ASPIRATION DUST ASPIRATION FROM PNEUMATIC CONVEYING DUST ASPIRATION FROM VACUUM CONVEYING

Cleaning Method Self-cleaning dust collectors are provided with proper cleaning methods that periodically cleanse the filtering elements. REVERSE AIR JET CLEANING METHOD A buffer tank is fed with dehumidified compresses air; the ends are connected to a group of “impulse valves”. A sequencer, complete with a programmable timer, sends its impulses to the “impulse valves”, which open themselves outright, and let the compressed air go out from the buffer tank towards the filtering elements; the dust is detached from the outer surface of the filtering element. Tank Filtration phase Cleaning...

FILTERING BAGS Manufactured of a specific soft cloth, with a cylindrical shape, our bags have filtering surfaces calculated multiplying their diameters by their height. FILTERING CARTRIDGES Manufactured of a non-woven rigid cloth, star-shaped, our filtering cartridges have filtering surfaces determined multiplying the amount of folds by the length of folds, and the height of the cartridges. If we consider the same diameter and the same amount of filtering elements and the same height, the filtering surface obtained with cartridges is 3 up to 4 times higher than the surface obtained with a...

Maintenance of the filtering elements The life of filtering elements depends very much on the filter exploitation, and on the characteristics of the filtered product. It is possible to extend the life of filtering elements, by cleaning them (with compressed air, or with water) Accessing to filtering elements: from the top, or through an access door in the side. For both cases, the dust collector is equipped with a tool for the quick installation and dismounting of the filtering elements. FILTERING ELEMENTS REMOVED FROM A SIDE ACCESS DOOR FILTERING ELEMENTS REMOVED FROM THE TOP

FILTERING SYSTEMS AND COMPONENTS FOR PLANTS QUALITY SERVICE TECHNOLOGY INNOVATION MIX S.r.l. - 41032 CAVEZZO (MO) - Via Volturno, 119/A - ITALY Tel. +39 0535.46577 - Fax +39 0535.46580 - info@mixitaly.com