Centralized filters
8Pages

MIXING SYSTEMS AND COMPONENTS FOR PLANTS Filtering Division Centralized filters ATEX-RATED PRODUCTS AVAILABLE CF/211

Quality and Innovation AIR POLLUTION Air pollution, with dusts emitted into the atmosphere, causes detrimental effects to people and things. SOCIAL ENGAGEMENT Technological progress and environmental protection, job and health, economy and ecology must proceed hand in hand; a need for the present, and a commitment for the next future. PRODOTTI E SOLUZIONI MIX MIX S.r.l. has introduced a complete range of rectangular modular filters type SRD (cartridge) and SRL (bag). Thanks to an innovative design, the MIX dust collectors can operate (with different sizes and technical features) in many...

Purpose Dust collectors are designed to separate dusts conveyed by a dusty air flow. Powders must be kept outside the filtering element, while the fluid passes through the filter cloth and becomes de-dusted. Dusts which remain inside the dust collector fall inside a container by pneumatic cleaning, set under the dust collector; while the clean air is released into the atmosphere. The separation of dust from air is never complete: the filter’s task is to reduce the dust rate, and to bring it back to the levels permitted by laws. Pneumatic cleaning group Product fall Product fall Dusty flow...

Maintenance Filter elements The filters SR. are equipped with a quick dismounting system for the filtering elements (cartridge or bag) allowing quick maintenance. Unscrew the three locking knobs Unscrew the knob and lift the locking bracket Raise the air conveying pipes to 180° Loosen the locking screws and turn the filtering element until it is released Extract the filtering element

Fabric filter element PREMIUM POLYESTER "THERMAL BONDED TNT MATERIAL - Emission <1 mg / Nm3 TNT USED BY MIX PRODUCED BY FREUDENBERG NB: Obtainable after application analysis (minimum product particle size / filtration rate / can velocity) - Antistatic treatment available - Lifetime: up to 20,000 operating hours - Cleanable by water wash - Classification: M according to BGIA test - Weight: 260 g / m² - Air permeability: 280 m³ / m² h (200Pa) - Low pressure drops: <700 Pa (70 mm H2O) - Low melting point heat-bonded synthetic fibers (Fig. 1) - Homogeneous surface (Fig. 2) which increases the...

Combination table SR Identification /: Standard A: Atex Air Outlet Type D: Horizontal cylindrical outlet set for conveying pipe H: Fan assisted discharge Solution with rotary-valve Solution with butterfly valve Solution with screw conveyor

Dimensions CARTRIDGE VERSION TYPE SRD.. Filter elements STRONG STRUCTURE Relative pressure: + 0,03 bar ÷ - 0,05 bar The dimensions of A-B-C sections refer to the dimension of the filter body, while lifting connections or leaning parts of connected accessories are excluded * Average air consumption in Nm3/h for use with displayed pressure

FILTERING SYSTEMS AND COMPONENTS FOR PLANTS QUALITY SERVICE TECHNOLOGY INNOVATION MIX S.r.l. - 41032 CAVEZZO (MO) - Via Volturno, 119/A - ITALY Tel. +39 0535.46577 - Fax +39 0535.46580 - info@mixitaly.com