1. Catalogs
  2. Mival
  3. Y strainer – Item 263 TIFQ
video corpo

Y strainer – Item 263 TIFQ

Y strainer – Item 263 TIFQ

Y strainer – Item 263 TIFQ

Product catalog summary
Technical Document Summary
1. Specifications
The document provides specifications for Y-filters used in potable water systems. The dimensions and weights for various diameters (DN) are listed, ranging from DN 15 to DN 300. Key measurements include length (L), height (H), and weight (KG).
2. Compliance and Certification
The document is a technical dossier for compliance with the Italian Ministerial Decree No. 174 of April 6, 2004, which regulates materials and objects used in fixed installations for the capture, treatment, conveyance, and distribution of water intended for human consumption. The TIFQ (Institute for Hygienic Quality of Food Technologies) certifies that the Y-filters produced and/or marketed by Mival srl, specifically model Fig. 263, are suitable for contact with drinking water. The validity of this certification is noted as January 2015.
3. Material Composition
The components of the Y-filters are detailed as follows:
  • Body and Cover: Grey Cast Iron EN-GJL-250
  • Basket: Stainless Steel AISI 304
  • Body/Cover Gasket: TESNIT BA-U (Aramid Fibers, NBR)
  • Nuts, Studs, Washers: Stainless Steel A2
  • Drain Plug: Brass CW614N
  • Plug Gasket: Virgin PTFE
4. Performance Parameters
The document specifies the normal and fine screen flow rates for each DN size, with temperature and pressure conditions set at 65°C and 16 bar, respectively.
See more

Catalog excerpts

Y strainer – Item 263 TIFQ-1

Soper'aOJaBtaMte* Tecnologie Alimer rear r Vista la rormativa vigente: dm n 174 del 6 aprile 2004 um n.w h impianti fisi. ie possono e&ere ™ consumo umano". clelle acciue destmaK ai FILTRO RACCOGLITORE Dl IMPURITA A Y serie PN 16 costruito con corpo e coperchio in ghisa grigia EN-GJL-250 con rivestimento interno ed esterno epossidico atossico, cestello estraibile in acciaio inox AISI304, guarnizione in fibre aramidiche (NBR), completo di tappo di svuotamento a part ire dal DN 65, attacchi flangiati UNI PN 16. Prodotto conforme al D.M. n. 174 del 06/04/2004. dette acciue TIF^K«jtop,„Ja»taM,ntad...T,c„ato0te«n1-a„ conlerttetoP.»«.-P--*'^d“'eto *hBpcP.0»P00.™--«—■rd""3UdaM,V flit ri . V P« P"*"1'1' „„ comm.ro* mien * DIMENSION! E PESI A RICHIESTA • Esecuzione in ghisa sferoidale PN16 • Esecuzione in ghisa sferoidale PN25 • Esecuzione in acciaio carbonio PN40 NOTA: Scartamento in accordo alia normativa EN 558-1, basic series 1 (DIN 3202, FI)

 Open the catalog to page 1
Y strainer – Item 263 TIFQ-2

4 Guarnizione Corpo/Coperchio 5 Dadi Ghisa grigia EN-GJL-250 Ghisa grigia EN-GJL-250 Acciaio inox AISI 304 TESNIT BA-U (Fibre Aramidiche, NBR) Acciaio inox A2 Acciaio inox A2 Acciaio inox A2 Ottone CW614N PTFE Vergine ‘Tappo di spurgo di serie a partire dal DN 65 NOTA: Verniciatura Epossidica Interna Ed Esterna Blu RAL 5005 - 250 n NOTA: I cestelli per tutti i DN sono rinforzati da una tela metallica romboidale CONDIZIONI DI ESERCIZIO Temperatura [°C] Pressione [bar] 65 16 NOTA: La temperatura massima di esercizio e data dalla verniciatura epossidica In ottemperanza al D.M. 174 ogni filtro a...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.