PSU-LED (A Type) Series Power Supply Unit for LED Lighting (Compliant to the higher harmonic current regulation)

Product catalog summary

Outline
The MITSUMI Power Supply Unit (PSU) for LED Lighting is designed to support the long life required for LED lighting and complies with higher harmonic current regulations. It features a simple lighting control function with a single volume control knob. The PSU is part of the Adaptors, Chargers/Switching Power Supplies category and may undergo modifications for improvements without prior notification.

Features

Standard product lineup for various output and current specifications, suitable for AC100V and AC240V inputs.
Constant current drive type.
Compliant with IEC61000-3-2 higher harmonic current regulation.
Designed in compliance with UL1310 and Japan's electrical appliance and material safety law.
High efficiency ranging from 70% to 85%.
Primary and secondary side isolation structure.
Long life expectancy of over 50,000 hours at 50°C.
Slim design to fit into a 70mm diameter hole.
Equipped with an AC input terminal board and mounting holes (M4) for easy installation.
Simple lighting control function with external volume resistance.

Specifications

Operation Temperature Range: 0~50°C
Storage Temperature Range: -20~60°C
External Volume Control Knob: 100kΩ, 10A (EIAJ standard)
Input Voltage Rating: AC100V for 100V specification, AC220/240V for 120V, 200V specification
Input Frequency: 50/60Hz
Output Current Accuracy: Rated current ±10%
Output Current Ripple: 50% o-p or less
Lighting Control Range: 0 to Rated output current
EMC Noise: Compliant to CISPR Class B
Life: 50,000 hours or more
Efficiency: 70~85% (subject to change based on output voltage/current specification)

Uses
The PSU is applicable for LED lighting and indicators such as down lights, toilet rack lights, and foot lights.

Dimensions
The product dimensions are 130mm x 40mm x 30mm. The product lineup table provides details on output current and voltage for both AC100V and AC200V series inputs, supporting various LED configurations.

Catalog excerpts

PSU-LED (A Type) Series Power Supply Unit for LED Lighting (Compliant to the higher harmonic current regulation)-1

Power Supply Unit for LED Lighting (Compliant to the higher harmonic current regulation) PSU-LED (A Type) Series Adaptors, Chargers/Switching Power Supplies OUTLINE Support long life required for LED lighting and Compliant to the higher harmonic current regulation. Equipped with a simple lighting control function with one volume control knob. FEATURES 1. Standard product lineup to meet output and current specifications. (Four types of products for AC100V input and AC240V input) 2. Constant current drive type. 3. Compliant to the higher harmonic current regulation, IEC61000-3-2. 4. Designed in compliance with UL1310, Japan electrical appliance and material safety law. 5. High efficiency. (> 70~85%) 6. Primary and secondary side isolation structure. 7. Long life: More than 50,000 hours. (@ Ta=50°C) 8. Slim design to allow all products to enter into the 70mm øhole. 9. Equipped with an AC input terminal board. 10.With mounting holes (M4) for easy fixing of the unit. 11.Simple lighting control function with external volume resistance. SPECIFICATIONS Item Operation Temperature Range Storage Temperature Range External Volume Control Knob for Lighting Control Input Voltage Rating Input Frequency Rated Load Output Current Rating Output Current Accuracy Output Current Ripple Lighting Control Range Higher Harmonic Current Regulation EMC Noise Life Efficiency Specifications 0~50°C -20~60°C 100kΩ, 10A (EIAJ standard) 100V Specification: AC100 120V, 200V Specification: AC220 / 240V 50/60Hz Refer to Product Lineup Table (next page) Refer to Product Lineup Table (next page) Rated current ±10% Output current 50%o-p or less 0 to Rated output current Complainant to IEC61000-3-2 Compliment to CISPR Class B 50,000 H or more 70~85% (Subject to change depending on output voltage / output current specification) • Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification. • The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.

Open the catalog to page 1

PSU-LED (A Type) Series Power Supply Unit for LED Lighting (Compliant to the higher harmonic current regulation)-2

Power Supply Unit for LED Lighting (Compliant to the higher harmonic current regulation) USES Can be applicable to LED lighting and indicator such as down light, toilet rack light, and foot light. Product Lineup Table AC100V series input 44V 12 LEDs or less (Serial connection) 12V 3 LEDs or less (Serial connection) Output current 120mA 275mA 350mA Output voltage Output voltage 44V 12 LEDs or less (Serial connection) 12V 3 LEDs or less (Serial connection) • Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification....

Open the catalog to page 2