SD Memory Card Connectors OUTLINE 1. SMT-type SD memory card connector. 2. Stand-off 0 mm. 3. Includes Push-in Push-out ejection mechanism. 4. Card ejection stroke of 8 mm for easy card removal. 5. Includes card detection switch and write-protect detection switch. 6. Built-in half lock mechanism to prevent card falling out at ejection. 7. Lock mechanism employed to inhibit removal of card when card lock is in place. 8. Direct soldering to board supported thanks to EMI/ESD plate. 9. Reverse type also available. SPECIFICATIONS ELECTRICAL CHARACTERISTICS Rated Voltage Rated Current Withstanding Voltage Insulation Resistance Contact Resista Contact 100mΩ or less Switch 250mΩ or less MECHANICAL CHARACTERISTICS Life (Matching Cycle) Card Insertion Force Eject Force Using Temperature Range • Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification. • The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.

SD Memory Card Connectors MATERIAL & FINISH Component Parts Housing Contact Switch Plate Slider Coil Spring Lock Pin Shield (H81R) Material LCP resin Copper Alloy Copper Alloy SUS LCP resin SUS SUS SUS Finish (Black 94V-0) Gold plating Gold plating Gold plating (Black 94V-0) - 1.62 +0.15 −0.1 CARD INSERTION SLOT 2.32 +0.15 −0.1 CARD INSERTION SLOT THE LOADING SURFACE 24.2 +0.15 −0.1 CARD INSERTION SLOT 22.65 +0.15 −0.1 CARD INSERTION SLOT (29.3) INCLUDE HOOK SHAPE CARD LOCK POSITION PUSH STROKE OF EJECT DISCHARGE STROKE OF EJECT Unit : mm • Any products mentioned in this catalog are subject to...

2.32 +0.15 −0.05 CARD INSERTION SLOT 1.62+0.15 −0.05 CARD INSERTION SLOT (29.9) (with LEAD) (0.2) Mount Surface to Card Surface CARD LOCK POSITION PUSH STROKE OF EJECT DISCHARGE STROKE OF EJECT Unit : mm • Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification. • The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.

SD Memory Card Connectors PATTERN PROHIBITION AREA The surface of the PWB where the connector is mounted recommends the resist processing The surface of the PWB where the connector is mounted recommends the resist processing Unit : mm • Any products mentioned in this catalog are subject to any modification in their appearance and others for improvements without prior notification. • The details listed here are not a guarantee of the individual products at the time of ordering. When using the products, you will be asked to check their specifications.