PME-E K19
4Pages

Open circuit cooling towers for medium-large installations cooling technologies

PME-E K19 SERIES COOLING TOWER The PME-E K19 series cooling towers are manufactured with a high thickness (3-5 mm) steel bearing frame, which is hotdip galvanized after all works and with fibreglass sandwich panels of 22 mm thickness. This kind of panel is made by a double laminated layer with supporting expanded material in between. This construction grants, also on large surfaces, a great mechanical strength and a good dropping water noise absorption. The surface of the fibreglass, moreover, is protected by a gelcoat that is resistant to UV rays, hot and cold water and abrasion due to...

1 Structure and casing Material: bearing frame in hot-dip galvanized steel after all works, fibreglass sandwich panels, thickness 22 mm. Characteristics: • great mechanical strength • external fibreglass gel-coat protection resistant to UV rays, hot and cold water and abrasion due to weather and chemicals • good noise absorption • non-corroding. 2 Water basin (optional) and top cap Material: orthophthalic polyester resin, reinforced with several layers of glass fibre matting. Characteristics: • external fibreglass gel-coat protection resistant to UV rays, hot and cold water and abrasion due to...

PME-E K19 Series, single fan with water basin PME-E K19 Series, single fan without water basin Water connections Dimensions Model Total nameplate fan motor power per model PME-E K19 Series, double fan with water basin PME-E K19 Series, double fan without water basin H Dimensions Model Water connections Total nameplate fan motor power per model For data concerning other versions, please write to export@mitact.it