Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Miselli
  3. XL/10 - XL/10T

XL/10 - XL/10T

XL/10 - XL/10T
1 / 1 PageView full catalog

XL/10 - XL/10T

Product catalog summary
Specifications:
The document describes vertical level gauges with a center-to-center distance of 10 inches (254 mm). These gauges are protected by a pressed steel casing with a black painted finish. The internal pipe is made from Polycarbonate (PC), which should not come into contact with gasoline, some alcohols, and solvents. The maximum working temperature is 100°C.
Mounting Procedures:
The level gauge can be mounted externally using two threaded holes M12 with a 254 mm center distance and a tolerance of +/- 0.3mm. Alternatively, it can be secured internally through two plain holes of 12.2 mm with a tolerance of 0 + 0.2 mm using the provided flanged nuts. The recommended maximum tightening torque is 5-7 Nm.
Models:
There are two models: XL/10, which is a vertical level gauge with a metal casing, and XL/10T, which includes an internal thermometer scaled in degrees Celsius (0-100°C) and Fahrenheit (50-200°F).
Components:
The components include a metal shell (P), hollow bolt (V), flanged hex nut (D), flat NBR seal (G), and a transparent body (C).
See more

Catalog excerpts

XL/10 - XL/10T-1

XL/10 - VERTICAL LEVEL GAUGES 10” WITH METAL CASING XL/10T - VERTICAL LEVEL GAUGES 10” WITH METAL CASING AND THERMOMETER XL/10T level indicators ACCESSORIES FOR HYDRAULIC COMPONENTS P= Metal shell V= Hollow bolt D= Flanged hex nut G= Flat NBR seal C=Transparent body Vertical level gauges center-to-center distance 10” ( 254 mm); external protection is provided by a pressed steel casing with black painted finish. Transparent internal pipe made from Polycarbonate (PC); avoid contact with Gasoline, some alcohols and some solvents (refers to technical table N.2 , page 59) Max working temperature : 100°C The mounting of the level gauge can be made externally by providing 2 threaded holes M12 on 254 mm centre distance, tolerance +/- 0.3mm. Alternatively they can be secured internally through 2 plain holes 12.2 mm, tolerance 0 + 0.2 mm using the flanged nuts provided. Maximum tightening torque suggested 5-7 Nm. Model XLT is equipped with an internal thermometer scaled in degrees Celsius 0-100°C and Fahrenheit 50-200°F

 Open the catalog to page 1

All Miselli catalogs and technical brochures

  1. 13 PGR
    13 PGR

    1  Page

  2. XL/127 - PLAST - ST
    XL/127 - PLAST - ST

    1  Page

  3. PROT / VM8 / 2
    PROT / VM8 / 2

    1  Page

  4. TMEG
    TMEG

    1  Page

  5. KMF/KMV
    KMF/KMV

    1  Page

  6. M/TCN - M/TCNS - M/TSN
    M/TCN - M/TCNS - M/TSN

    1  Page

  7. TMA
    TMA

    1  Page

  8. TCSA/TCSF
    TCSA/TCSF

    1  Page

  9. TCZ/TCZS
    TCZ/TCZS

    1  Page

  10. XL/127 - PLAST - SL
    XL/127 - PLAST - SL

    1  Page

  11. EP 434
    EP 434

    1  Page

  12. EP 510
    EP 510

    1  Page

  13. 13 PT
    13 PT

    1  Page

  14. 01 S/T
    01 S/T

    1  Page

  15. PF
    PF

    1  Page

  16. SLNS/SLNT
    SLNS/SLNT

    1  Page

  17. XLV - XLV/T
    XLV - XLV/T

    1  Page

  18. XL - XL/T
    XL - XL/T

    1  Page

  19. SLV/SLVT
    SLV/SLVT

    1  Page

  20. TCN/TCNS/TSN
    TCN/TCNS/TSN

    1  Page

  21. TCNB - PLASTIC PLUGS WITH INTERNAL HEX HEAD
    TCNB - PLASTIC PLUGS WITH INTERNAL HEX HEAD

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.