MX-COMBO-G > High-speed and High-dynamic It is characterized by remarkable performance advantages, with a maximum idle - running speed ranging from 200 to 210 m/min and an acceleration of 2.8G. The greater the quantity and size of the workpiece arrangement, the more significant the improvement in speed. > Efficiently Reduce the Usage Costs When achieving the same cutting efficiency, it exhibits substantial advantages in power, gas, and consumables consumption, resulting in a comprehensive cost reduction of at least 30%. > Full Enclosed Structure and Exchange Table The fully enclosed exchange table machine structure alleviates concerns regarding operational safety and laser safety. The design featuring thickened sheet metal also ensures that potential accidental collisions with the machine during daily use are not a cause for worry. Internal monitoring allows for a clear view of the entire sheet cutting area. > High- intelligent Zoned Dust Removal The distinctive design of the suction duct structure and the intelligent zoned suction system guarantees high efficiency in dust extraction and air purification, which is conducive to health and environmental protection. It effectively mitigates the continuous impact of hot air and dust within the machine tool. Integrated design, one machine integrates the cutting function of tubes and sheets, saving equipment procurement costs and equipment footprint, and making space layout more flexible. There exist three methods of loading. In the case of shorter pipes, they can be directly inserted into the front chuck for loading. Alternatively, the rear chuck can grip the pipe in the exposed area from the rear and push it forward for loading. For long pipes, simple loading can be accomplished via the sliding door equipped with a safety access switch on the side. It is capable of cutting not only square tubes, round tubes, rectangular tubes, H-beams, and other special-shaped tubes but also thin and thick plates. Multiple cutting nozzles can be switched for utilization to attain the optimal cutting effect. Equipped with pneumatic concave wheels support frame, it offers stable support during pipe cutting, which prevents the pipe from sagging or deforming and enhances processing accuracy. Technical Specification Technical Specification Model