SUPERIOR, LEADING EDGE NEGATIVE-STIFFNESS, COST EFFECTIVE, VIBRATION ISOLATION CT-10 Ultra-Thin Bench Top Vibration Isolation Platform Weight: Approximately 30 lb (13.6 kg) Dimensions: 12.6" W x 12.6" D 2.7" H (320mm W x 320mm D x 68.6mm H) Approximate payload weight range: • Horizontal frequencies are weight dependent. • Horizontal frequency of ~1.5 Hz is achieved at or near the upper limits of the payload range. • At the lower payload weights the horizontal frequency will increase. • Vertical frequency is tunable to 0.5 Hz throughout the payload range. Simple Set-Up and Adjustment The Compact Tabletop (CT-10) uses Minus K's patented breakthrough technology, allowing for the best performance on the market in just a 2.7-inch tall, approximately 12.6-inch deep and wide isolation platform. This unit is as tall as Minus K's CT-2 and offers similar horizontal performance with additional payload ranges for smaller instruments. This completely passive mechanical isolator offers 10-100 times better performance than a full-size air table. It does this without any air or electricity! This vibration isolation platform is extremely easy to use and offers our signature 0.5 Hz vertical natural frequency and ~1.5 Hz horizontal natural frequency. There are only two adjustments. The CT-10 is ideal for all types of benchtop microscopes. It is the thinnest, most portable, and user-friendly isolator ever offered that can deliver this performance. For more information contact us at: 310-348-9656 or [email protected] Typical Performance Curves: 20 0 Hindy Ave., Unit C, Inglewood, CA 90301 Tel: 310-348-9656 Fax: 310-348-9638 www.minusk.com [email protected] Copyright ©2023 Minus KTechnology, Inc. All rights reserved.