SUPERIOR, LEADING EDGE NEGATIVE-STIFFNESS, COST EFFECTIVE, VIBRATION ISOLATION BM-10 Bench Top Vibration Isolation Platform Weight: Approximately 35 lb (16 kg) Dimensions: 12.2” W x 12.2” D x 4.6” H (310mm W x 310mm D x 117mm H) Approximate payload weight range: Model Payload Range The BM-10 bench top platform offers 10-100 times better performance than a full size air table in a package only 4.6 inches tall and 12 inches wide and deep. It also does this without any air or electricity! This vibration isolation platform is extremely easy to use and offers extreme performance. It offers a 1.5 Hz horizontal natural frequency and our signature 0.5 Hz vertical natural frequency. There are only two adjustments. The BM-10 is perfect for new generations of small SPM’s that require the highest performance in a very compact system. Performance Horizontal frequencies are weight dependent. Horizontal frequency of 1.5 Hz is achieved at or near the upper limits of the payload range. At the lower limits of the payload range the horizontal frequency is approximately 2.5 Hz. Vertical frequency is tunable to 0.5 Hz throughout the payload range. This is the thinnest, smallest footprint, most portable, and most user-friendly isolator ever offered that is capable of delivering this level of performance. For more information contact us at: 310-348-9656 or [email protected] Simple Set-Up and Adjustment The vertical curve below demonstrates the vertical 1/2 Hz performance of the BM-10. Horizontally, the BM-10 offers natual frequencies as low as 1.5 Hz, much better than typical air tables. Typical Performance Curves: 460 S. Hindy Ave., Unit C, Inglewood, CA 90301 www.minusk.com Tel: 310-348-9656 Fax: 310-348-9638 Copyright  2009 Minus K Technology, Inc. All rights r