minimo_ver2_e
8Pages

HIGH PERFORMANCE PRECISION POWER TOOL SYSTEMS Ideal Handp

Precision electrical driven micro grinder Ideal Handpiece…Evolutional Minitor launches the evolved Minimo with a motor identifying function. The new Minimo power pack enables separate control on each type of handpieces with a high-end microcomputer. It derives the performance of the handpieces at the maximum which achieves tough torque in all rotation-speed range. In addition to rotation speed display and LED load meter, external control function becomes standard on this series, which enables the handpieces to be installed in automatic machines. Minitor puts all of the requirements...

HIGH PERFORMANCE PRECISION POWER TOOL SYSTEMS POWER PACK The high-end power pack mounts new functions which maximize the performance of Minitor handpieces. This power pack identifies the type of the connected handpiece, displays rotation speed, and controls optimum torque. It is also compatible with the earlier handpieces which do not have the motor identification chip, and gives you more powerful feeling with digital display of its output rate (%). Handpiece identification function Error code display New feedback control High-end microcomputer control Foot switch holding function Digital...

POWER PACK POWER PACK Handpiece identification function When a Ver.2 handpiece is connected, the power pack identifies its motor type, displays its rotational speed, and control optimum torque. Digital display (rotation speed or output rate) （ 116 mm） Identifying a connected handpiece type, the power pack automatically selects its display type (rotation speed (x1000min) or output rate (Rate %)). ● Ver.2 Handpiece （except Recipron and Mini Belt Sander） ● Ver.2 Recipron,  Mini Belt Sander, and  handpieces except Ver.2 Input Voltage X1000min lump is turned green LEVEL lump becomes orange. Rated...

Loaded condition in operation is displayed with LED meter. In overload, the error is alerted by the LED load meter and sounds. (Use a handpiece in the allowable continuous usage level.) ■ High-end microcomputer control This high-end microcomputer control enables to identify the connected handpiece type and to manage its optimum output. ■ Rotation direction switch You can change rotation direction (FWD. or REV.) of a handpiece. ■ External control function is equipped as standard. The following input/output signals are available from the foot switch socket at the back side of a power pack:...

HANDPIECE Hand switch You can switch ON/OFF with the single hand. It should be convenience if you press the ON/OFF switch frequently or use a handpiece away from the power pack. Handpiece Identification Function Suitable for Handpiece Identification Function. You can use each handpieces with optimum control. Extreme accuracy Our products achieves the world’s leading accuracy, and the most suitable for precision processing. Especially, with small diameter diamond plated points, the small amount of runout enables you to process more smoothly. Also, the small runout value makes the tools last...

Heavy Duty Rotary Standard collets :φ2.34 (Accessory :φ3.0/carbon brush 1 set) The reinforced Head Housing allows you to handle large load work easier. Accommodates tools with shaft size up to 6.35mm diameteer Standard collets :φ6.0 (Accessory :φ3.0/carbon brush 1 set) Speed Range ： 1,000∼20,000r.p.m Maximum Torque 4.5cN m ： ・ Speed Range ： 1,000∼30,000 r.p.m Maximum Torque 4.2 cN m ： ・ Speed Range ： 1,000∼15,000r.p.m ： ・ Maximum Torque 5.9cN m Speed Range ： 1,000∼15,000 r.p.m ： ・ Maximum Torque 5.9 cN m Speed Range ： 800∼8,000r.p.m ： ・ Maximum Torque 6.9cN m Lateral swing motion that is...

Two more models for international CM5112 C2112 Power Pack (115V±5%) CM5212 C2212 Power Pack (230V±5%) Two more models for international CM10112 C2112 Power Pack (115V±5%) CM10212 C2212 Power Pack (230V±5%) Two more models for international CM11112 C211 2 Power Pack (115V±5%) CM11212 C2212 Power Pack (230V±5%) Motor & head compatibility table Collet chuck compatibility table ^Select a suitable collect chuck with your head. M MINITOR CO.,LTD. ,apan http://www.minitor.co.jp Head Office: 16-3 Ryogoku 1-chome, Sumida-ku, Tokyo 130-0026 Japan Osaka br: 4-4 Itachibori 2-chome, Nishi-ku, Osaka...