High reach roof bolter with mesh handler Drilling system enables holes of between 25 to 38 mm dia. to be drilled Ergonomic, fully adjustable, operator seat with suspension. to up to 15.0m depth (depending on drilling and strata conditions). Operator’s driving cabin conforming to FOPS & ROPS regulations. 6.0 m straight line drill coverage. Reliable hydraulic controls – ensuring low operating costs Man in Position drilling system – locates the operator close to the drilling and bolting operations and his protected by an MSHA. Doubled Diesel powered articulated chassis with permanent 4-wheel drive. full control system to drill from Driving cabin. Fail-safe, wet multi-disc service brakes with additional fail-safe Certied closed, air conditioned driving cabin, where operator will have emergency-parking brake. the possibility to drill bolting holes. Bolt installation has to be done from Inch tramming – slow driving of the machine from one to another operator basked, located at the end of boom. bolting row, controlled from operator’s stand, located at the end Capable of bolting in height of from 4,0 m up to 7,0 m Machine ready to install mechanic expansion shell bolts, Steel grid side protection of operator’s stand. resin bolts and cement grouted bolts as well as wire mesh, Mesh handler with wire mesh in roll, prepared for roof as well as side bolting. Minimum tramming height: 2.3 m.

High reach roof bolter with mesh handler Main components 2000 Telescopic AR D/E boom with Roof referenced type mast Deutz diesel engine Tyres 14.00 x 20 Fletcher Heavy duty rotary percussive HV32 rock drill Roof referenced mast with hydraulic drill guide Typical installed electric power – 55 kW Hydraulic axial piston pumpwith load sensing and gear Mesh handler with wire mesh in roll prepared for side bolting Closed air-conditioned cabin Concrete injection system Options Fire suppression system with ame detection Air-conditioning for bolting operation 10980 (+800=11780) By-pass ltration Hand pump...