*mydirectindustry

MVSC1-220

Product catalog summary

Specifications:
The MVSC1-220 series includes models 3E1, 3E2, 4E1, 4E2, and 4E2 C.P.R. with port sizes Rc1/4 and Rc1/8. The number of ports/positions varies from 3/2 to 5/3. The medium used is air, with an operating pressure range of 0.2~0.8 MPa for some models and 0.3~0.8 MPa for others. The proof pressure is 1 MPa, and the effective orifice size ranges from 16 mm² to 18 mm². Response times are less than 30ms for DC and less than 35ms for AC, with ambient temperatures between -5°C and +50°C. Voltage options include AC110V, 220V (50/60Hz), and DC24/12V, with power consumption at AC=1.12VA and DC=0.95W. The insulation class is F, and weights range from 86g to 198g.

Ordering Information:
The document provides examples for ordering wires and valves, specifying model, voltage, wire length, and other configurations such as normally closed (NC) or open (NO) options. Port thread options include Rc, G, and NPT threads, with manifold types available for certain models.

Flow Features:
The flow rate is depicted against secondary pressure, with primary pressures at 0.7 MPa, 0.5 MPa, 0.3 MPa, and 0.1 MPa. The flow rate is measured in Nl/min.

Dimensions and Connectors:
Detailed dimensions are provided for various models, including solenoid valves and manifolds. Connector options include DIN connectors with or without LED indicators, and wire lengths are specified for horizontal connectors.

Caution:
It is advised not to apply force to the coil when tightening the tube fitting.

Catalog excerpts

Specification Model Order example of valve MVSC1 - 220M - 4E2C - NC - □ AC110 - H1 - G BODY Blank: Body ported type MODEL WIDTH *M: Manifold type (*Only for 4E* ) NC: Normally closed NO: Normally open (Only for 3E1 type) J E1: Single Solenoid E2: Double Solenoid C: Closed center P: Pressure center R: Exhaust center (Only for 4E2 type) Order example of manifold * Use sam® „ manifold with MVSC. BORE SIZE Blank: Rc1/4 6A: Rc1/8 (Only for 4E* & body ported type) * Wire length only for "H: Horizontal connector". PORTTHREAD Blank: Rc thread G: G thread NPT: NPT thread (Only for body ported type) Wire length MODEL Blank: Body ported type MANIFOLD PORT THREAD M: Manifold type | NUMBER Blank: Rc thread 1 2 3... G: G thread MANIFOLD NPT: NPT thread 3B: 3 port (for body ported type) 3M: 3 port (for manifold type) 5B: 5 port (for body ported type) 5M: 5 port (for manifold type) CautionProhibit apply force to coil when tighten the tube fitting. Order example of wire Use the same wire with MVDY. Only for "H: Horizontal connector".

Open the catalog to page 1