Catalogs >
Mindman Industrial >
MPGS series

MPGS series
4Pages

Catalog excerpts

MPGS series GAP SENSOR Features ● Digital LCD display, easy readout ● IP65 enclosure ● Detection distance : 0.01 ~ 0.10 mm ● Repeatability : ± 5 μm Detection Circuit Sensor SUP. : In-let Port Detection Port Orifice Features highlight IP65 compliance Easy to check workpiece located on the right place ● Intuitive recognize in graphic interface, easy to check the gap between workpiece and platform. Workpiece is not in the sensing range. Graphic interface show the workpiece relative position. Workpiece in right position. Reference gap easy setting ● To set the reference gap by press up + down at the same time. ● The higher repeatability is, the more guarantee is. The gap cause by shavings can be detectable Milling Head Workpiece

Open the catalog to page 1

MPGS Specification Detection Distance Operating Pressure Range Withstand Pressure Clean air, Non-corrosive / Non-flammable gas *1 Power Supply Voltage Current Consumption ≤ 20 mA 1 NPN : open collector 1 output Max. Load Current : 125 mA Max. Supply Voltage : 30 V DC Residual Voltage : ≤ 1.5 V Switch Output Consumption Flow Rate 1 PNP : open collector 1 output Max. Load Current : 125 mA Max. Supply Voltage : 24 V DC Residual Voltage : ≤ 1.5 V ≤ 8 L/min @ 300 kPa Output Short Circuit Protection 3 ½ digital, 7 segment LCD display ( White ) ( Sampling rate : 5 times / sec. ) Detection Nozzle...

Open the catalog to page 2

MPGS Order example & Dimensions GAP SENSOR Order example Panel instructions RATED DISTANCE RANGE OUTPUT METHOD PRESSURE PORT Mounting accessories (Option) White Color Display OPTION PARTS Installation precautions ● When mounting, don't apply tool fix to the body, it will damage the sensor. ● Over tightening may cause damages to the port thread, mounting bracket and pressure sensor. Under tightening may result loosen or leakage. A18: Mounting bracket A19: Mounting bracket B3: Panel adapter C3: Panel adapter + Front protective lid Setting Button Pressure supply port Detection port * Internal...

Open the catalog to page 3

MPGS Accessory Mounting bracket This device must be installed to maintain IP 65 (Dust and splash proof) enclosure rating. Panel type Front protective lid + Panel adapter MP-C3 36×36±0.3mm Front protect

Open the catalog to page 4

MPGS series 4Pages

Catalog excerpts

All Mindman Industrial catalogs and technical brochures

MPGS series
4Pages