Large Format UV LED Curable Flatbed Inkjet Printer New generation output software with 16 bit rendering (bundled item) High performance RIP software designed to fully enable all advanced features of JFX-1631 / 1615plus 16 bit rendering eliminates tone jumps and produces fine color reproduction. Different images can be freely nested on the RIP. The web update function has been added to RasterLink Pro5 to easily achieve both software update and profile download. Cyan Magenta Yellow On-demand Piezo head Type Capacity Maximum print width (W) × (D) With post-curing unit Print accuracy Now with Inkjet Primer capability and new UV curable ink offerings will open a host of new possibilities and applications ± 0.3 mm (0.01 ") or ± 0.3% from specified print distance ± 0.2 mm (0.01 ") or ± 0.1% from specified print distance Light Cyan Light Magenta Thickness Weight Media table Less than 50 kg (110.2 lbs.) (when the media is loaded evenly) Vertically divided into 4 zones Lifetime *1 Lifetime *1 Power specifications About 1,000 hours *3 1-phase : AC 200 - 240 V, 50/60 Hz, (power from main unit) Power consumption Applicable standard VCCI class A, CE Marking, CB Report, UL, RoHS Directive Power specifications Power consumption Operational Temperature environment Humidity Temperature accuracy Temperature gradient Dust Dimensions (W) × (D) × (H) Cleaning solution (for both LH-100 and LF-200) Fluorescent UV tube lamp *1 600 ml ink pack requires eco cartridge (OPT-J0237). Eco cartridges can be used repeatedly by replacing ink packs. *2 Inkjet primer cannot be used in conjunction with LF-200 inks. *3 Clear ink is not available for LF-140 inks. However LH-100 clear ink can be used in combination with LF-140 inks. Option Item 18 – 25 °C (64.4 – 77 °F) Less than ± 10 °C/h (18 °F) Equivalent to normal office level 4,200 × 4,300 × 1,600 mm (165.4 × 169.3 × 63 ") About 10,000 hours Equipped with fluorescent UV tube lamp *2 Vertically divided into 2 zones Equipped with UV Light Emitting Diodes UV unit Vacuum area Post-curing unit Absolute accuracy Perpendicularity Usable media Inkjet Primer Head Print resolution Delivery & Retraction unit IF unit for external vacuum A vacuum unit is not included in JFX-1631plus or JFX-1615plus . Please purchase the vacuum unit separately. Additional power source is required in order to use the vacuum unit. Each vacuum unit includes IF units for external vacuum (OPT-J0202). *1 Reference value. There is no guarantee as to the lifetime. *2 Post-curing unit is equipped with 3 fluorescent UV tube lamps in one set. *3 After about 1,000 hours of usage illumination level declines by about 20%. Specifications for RU-160 roll unit Item Carrier system Usable media Width Thickness Weight Roll outside diameter Roll inside diameter Print surface Power specifications 3 inch Inside/outside selectable 1-phase : AC 200 – 240 V, 50 / 60 Hz, (power from main unit) Power consumption Dimensions Less than 150 VA 4,300 × 5,000 × 1,600 mm (Main unit + Roll unit) (169.3 × 196.9 × 63 ") 4,300 × 3,500 × 1,600 mm (Main unit + Roll unit) (169.3 × 137.8 × 63 ") 1,813 kg (Main unit 1,613 kg + Roll unit 200 kg) 3,997 lbs. (Main unit 3,556 lbs. + Roll unit 440.9 lbs.) 1,513 kg (Main unit 1,313 kg + Roll unit 200 kg) 3,335.5 lbs. (Main unit 2,894.6 lbs. + Roll unit 440.9 lbs.) • Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing. • Some substrates require primer before printing. Please test materials beforehand or ask your sales representative. Safety notice: You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly: • Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source. • Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened • In addition, please read the instructions and guidelines of the manual carefully and follow those. *Each print size is limited to the maximum print area available on the flatbed. 2182-3 Shigeno-otsu, Tomi-city, Nagano 389-0512, Japan Tel: +81-268-78-2288 [email protected] www.mimaki.co.jp 150 Satellite Boulevard, suite A, Suwanee, Georgia 30024, U.S.A Atlanta +1-888-530-3988 Boston +1-888-530-3986 Los Angeles +1-888-530-3987 Chicago +1-888-530-3985 www.mimakiusa.com Stammerdijk 7E, 1112 AA Diemen, The Netherlands Tel: +31-20-4627-640 [email protected] www.mimakieurope.com @MimakiEurope Highest Precision UV LED Printer HIGHER SPEED MORE FLEXIBILITY

Experience the great benefits of UV LED printing combined with a dramatic increase in productivity. Always striving for the best, Mimaki has achieved significant productivity enhancements for its flatbed UV LED printer series JFX with up to 80 % higher speeds. The new JFX plus series features a standard post-curing unit that enables printing of up to 23.6 sqm/h. This is nearly twice as fast as previous models. A roll unit has been developed to boost efficiency and productivity when printing on roll fed substrates. In addition, Mimaki's IMS* technology ensures the highest image quality exceeding...