Accessories Catalogue 2012 / 13
172Pages

Nothing but HEAVY DUTY" Angle Grinder System Accessories/FIXTEC Nut 94-95 Biscuit Jointer Accessories 137 Caulk and Adhesive Gun Accessories 141 Circular Saw System Accessories 127 Chisels & Special Application Tools -SDS-plus 22-24 Chucks - Keyed & Keyless 78-79 Circular Saw Blades - Wood Cutting Blades 125 - Metal Cutting Blades 126 Cores/Tunnel Bits - TCT - SDS-plus 11 Cutting & Grinding Discs 93 Diamond Core Bits - Wet Core Bits/System Accessories 80-82 - Dry Core Bits/System Accessories 83-87 Drill Bits ■ Concrete -SDS-plus 7-10 ■ Concrete/Masonry (round shank) - Concrete 31 ■ Wood -...

LONGER THAN LIFE ! + 50 % LONGER LIFE TIME Thanks to the optimum 4 x 90° symmetry, all four carbide cutting edges function evenly and do not jam up when hitting rebar. Solid one piece carbide tip for outstanding life time. Centering tip for straight forward spot drilling with pinpoint accuracy. Four symmetrically spiral shoulders ensure low, uniform flute wear. Thicker core body for low vibration and extra strength minimising drill bit breakages. The PGM seal guarantees precisely fitting anchor application holes over the entire life time of the drill bit.

SDS-plus RX4 drill bits – 4 cut Embedded solid one piece carbide with centering tip for easy spot drilling and long life time. Four symmetrical 90° cutting edges guarantee perfect round holes for anchor fixing as well as reduce the risk of the drill bit jamming when hitting rebar. The high volume flute geometry ensures optimum dust removal. 4 spiral flute design provides lowest vibration and low uniform flute wear. Suitable for brick, concrete, reinforced concrete and natural stone. Diameters > Ø 18 mm have a 3pc carbide tip. ▲ Pre-drill with a short drill bit of the same diameter.

SDS-plus RX4 drill bits – 4 cut Ø mm ▲ Pre-drill with a short drill bit of the same diameter. SDS-plus RX4 drill bits – 4 cut / 10 pack Ø mm SDS-plus RX4 drill bits – 4 cut / cassettes Description SDS-plus drill bit set (5-piece). Plastic container ቢ with Ø 5 / 6 x 110 mm with Ø 6 / 8 / 10 x 160 mm. SDS-plus drill bit set (5-piece). Plastic container ቢ with Ø 5.5 x 110 mm with Ø 5.5 / 6 / 7 / 8 x 160 mm. SDS-plus drill bit set (7-piece). Plastic cassette ባ with Ø 5 / 6 / 8 x 110 mm with Ø 6 / 8 / 10 / 12 x 160 mm.

SDS-plus drill bits – 2 cut Maximum drilling speed: Maximum durability: Minimum vibration: The dynamic, chisel-shaped drill head ensures swift penetration and optimal material removal. The toughest carbide tip in optimised design held by high strength brazing offers an unrivalled durability even in steel reinforced concrete. The unique 2-flute design reduces vibrations and transfers the energy directly to the bit tip. ▲ Pre-drill with a short drill bit of the same diameter.

SDS-plus drill bits – 2 cut Ø mm ▲ Pre-drill with a short drill bit of the same diameter.

SDS-plus drill bits – 2 cut / 10 pack A Ø B Ø mm SDS-plus drill bits – 2 cut / 50 pack Ø mm SDS-plus drill bits – 2 cut / cassettes Description Set of 5 SDS-plus hammer drill bits. Plastic container ቢ with Ø 5 / 6 x 110 mm and Ø 6 / 8 / 10 x 160 mm. Set of 5 SDS-plus hammer drill bits. Plastic container ቢ with Ø 5.5 x 110 mm and Ø 5.5 / 6 / 7 / 8 x 160 mm. Set of 7 SDS-plus hammer drill bits. Metal cassette ባ with Ø 5 / 6 / 8 x 110 mm and Ø 6 / 8 / 10 / 12 x 160 mm. Set of 10 SDS-plus hammer drill bits. ባ Metal cassette with Ø 5 / 6 / 6 x 110 mm and Ø 6 / 6 / 8 / 8 / 10 / 12 / 14 x 160 mm....

Nothing but HEAVY DUTY" SDS-plus contractor drill bits - SDS-plus TCT multipurpose drill bits These drill bits will drill in metal, wood and stone but in rotary mode only. Hammer action cannot be used with these drill bits. Ideal for tradesmen who need to drill through a variety of materials in one go. This grease has been especially formulated to lubricate and protect both the tool and accessories ensur- ing increased life time. Apply sparingly directly onto the reception of the drill bit, chisel or core cutter etc.

SDS-plus cutters TCT core core cutters Core cutters for rotary hammers up to 4 kg. All TCT cores have a M 16 x 2 thread and fit to both SDS-plus and Hex 11 arbors. Arbor and pilot drill bit required additionally. TCT core cutter set versions Set version includes: TCT core cutter, SDS-plus arbor 105 mm length, TCT pilot drill bit Ø 8 x 120 mm and allen key. TCT core cutter arbors Both SDS-plus and Hex arbors include an allen key and require a pilot drill bit additionally. SDS-plus ቢ SDS-plus arbor SDS-plus ቢ SDS-plus arbor Hex 11 ባ Hex arbor Service kit includes – ቤ allen key x 1 grub screws...

TCT Universal Holesaws TCT Universal Holesaws are ideal for electricians, carpenters, kitchen fitters and all related heating, ventilation and plumbing trades. TCT Universal Holesaws are designed for use in a wide variety of materials such as: ■ ■ ■ ■ ■ ■ Bricks* – suitable for both solid bricks and bricks with cavities Aerated concrete blocks*, lightweight aggregate blocks and breeze blocks Soft density lime-sandstone building blocks upto hardness of 30 N/mm2 Softwoods, chipboard, plywood, medium density fibreboard (MDF) Plastics and plastic coated board (Contiboard) Gypsum / plaster board...

Nothing but HEAVY DUTY" All TCT Universal Holesaws have a M16 thread and fit to both FIXTEC SDS-plus and Hex11 reception arbors. FIXTEC arbor and pilot drill required additionally. Made in Germany. ,1 No. of teeth Quantity 'J£- ^NCode TCT Universal holesaw set version Set version includes: TCT universal holesaw, countersink, SDS-plus arbor 118 mm length and TCT pilot drill bit 0 8x120 mm. The countersink can be removed for use in wood and brick. Countersink - When fitted to the 68 mm holesaw it allows for the flush fitting of electrical switch boxes FIXTEC arbors Both SDS-plus and Hex...