*mydirectindustry

TGS3600

Product catalog summary

Overview: The TGS3600 is a versatile welding machine equipped with both stationary and traveling welders to meet high production demands. It is designed to minimize fabric handling and can produce liners or covers of various sizes.

Hot Air Welding Applications: The machine is suitable for materials such as woven polypropylene, woven polyethylene, PVC laminate, PVC coated, polyurethane coated, and polypropylene.

Technical Specifications:

Voltage: Two 60 Amperes, three-phase, 220 volts power supplies (one for the power glide and one for the stationary unit).
Air Requirements: No air needed for the traveling unit; onboard air compressor for the stationary unit at 100 PSI @ 3 CFM.
Throat Capacity: 3.65 meters (12 feet).
Seam Width: 12mm to 50mm (0.5in to 2in), depending on the application and material type.
Welding Speed: Up to 12.2 meters per minute (40 feet per minute).

Features:

Functional and easy-to-use interface for PLC with single operator controls.
Track assembly to accommodate any distance of travel.
Unwind system for automatic fabric tension control.
Driven fabric puller system to reduce labor.
Measuring system controls for precise product production.
Fabric cutting unit for accurate cut-to-length products.
Hot air heat system for increased productivity.

For more information, visit www.weldmaster.com.

Catalog excerpts

The First Choice Globally AUTOMATION SERIES. High Production The TGS3600 is equipped with both a stationary welder and a traveling welder to keep up with the high production demands. It is designed to eliminate excessive fabric handling and built to produce almost any size liner or cover. •Woven Polypropylene •Woven Polyethylene •Polyurethane Coated 4220 Alabama Ave | Navarre | Ohio | 44662 | USA | T. 330-809-6086; 330-337-2928 | [email protected]

Open the catalog to page 1

Air Requirements: Throat Capacity: (2) 60 Amperes - Three Phases - 220volts power supplies *1 power supply for the power glide, 1 power supply for stationary No Air / Onboard Air compressor for traveling unit 100PSI @ 3CFM for stationary welder 3.65M (12ft) Seam Width: Welding Speed: * Depending on the application, the seam width and the type of material used 1. Functional easy to use interface for PLC. Single operator controls. 2. Track assembly to accommodate any distance of travel. 3. Unwind for automatic fabric tension control. 4. Driven fabric puller system for reducing labor. 5. Measuring...

Open the catalog to page 2

TGS3600

TGS3600

Catalog excerpts

All Miller Weldmaster catalogs and technical brochures

Archived catalogs