From the innovators of welding automation, Miller Weldmaster presents the BT2000. Designed to increase tank and bladder production while dramatically reducing labor. Our exclusively designed BT2000 welding heads enable the operator to weld overlaps and top and bottom tape covers, all in one pass. The three seams at one time makes the BT2000 the leading choice for tank and bladder makers worldwide. The low ground construction enables you to construct your tanks using your floor. This unique design reduces floor space while eliminating material handling. For the fastest most efficient means of tank and bladder construction…the BT2000. Hot Air Welding Applications: •Woven Polypropylene •Woven Polyethylene •PVC Laminate •PVC Coated •Polyurethane Coated •Polypropylene and More 4220 Alabama Ave | Navarre | Ohio | 44662 | USA | T. 330-809-6086; 330-837-2828 | [email protected]

AUTOMATION SERIES- Seam Type technical Specifications FEATURES & BENEFITS 80 Amperes - Three Phases - 220 volts Throat Capacity: Speed: Up to 6 M/min (20 Ft./min)* * Depending on the application, the seam width and the type of material used 1. Low construction design to reduce floor space and eliminate material handling. 2. Simultaneous hot air heat systems to weld overlaps and top and bottom tape 3. Cable carrier and track for ease of use. 4. Quad element for multiple hot air 5. Easily accessible controls for ease of