product information www.miller-stephenson.com Cleaning Solvent & Flux Remover MS-550 (Aerosol) MS-552 (Bulk Liquid) A nonflammable, cleaning solvent and flux remover for critical cleaning of electronic components, circuits, precision instruments, electrical contacts, relays, and switching devices. Well suited for cleaning oils, flux and particulate matter from complex assemblies. Evaporates quickly and leaves no residue. It replaces HCFC-225 in many applications. ELASTOMER COMPATIBILITY: (Immersion: 15 mins at Room Temperature)       Butyl Rubber Polysulfide Buna S Neoprene Chlorosuflonated PE Viton®B Natural Rubber EPDM Buna N Urethane Silicone Elastomer swelling and shrinking will, in most cases, revert to within a few percent of original size after air drying. Swell, shrinkage, and extractables are strongly affected by the compounding agents, plasticizers, and curing used in the manufacture of the elastomers. Test for compatibility before use. Evaporates quickly Leaves no residue Nonflammable Non ozone depleting RoHS Compliant PROPERTIES OF SOLVENT: Boiling Point………………………………… 97°F/36°C Flash Point………………………………………….None Liquid Density…………………..1.32 g/ml @ 77°F/25°C Ozone Depletion……………………………………..0.00 PLASTIC COMPATIBILITY: (Immersion: 15 minutes at Room Temperature)       Acetal Polypropylene Polyester, PBT, PET Polysulfone, PSO Polyimides Phenolic Polyethylene Liquid Crystal Polymer Epoxy PEK, PEEK PTFE Polyvinylchloride NOTE: Acrylic, ABS, and polycarbonate, if under stress, may show slight cracking or crazing damage. Test for compatibility before use. METAL COMPATIBILITY: (Immersion: 2 weeks at 99°F/37°C)    Aluminum Copper Iron Note: Test for compatibility before use. This product is nonflammable, odorless, and has a low order of toxicity. Safety Data Sheets (SDS) are available upon request. For technical support: 800-992-2424 (8-4 E.T.) in the U.S. 800-323-4621 (8-4 E.T.) in Canada. e-mail: [email protected] www.miller-stephenson.com Viton® is a registered trademark of E.I. duPont de Nemours and Company or its Affiliates. FluoroSolv™ is a trademark of Miller-Stephenson Chemical. Co Inc. The recommendations made here with and the information set forth with respect to the performance or use of our products are believed, but not warranted to be accurate. The products discussed are sold without warranty, as to fitness or performance, express or implied and upon condition that purchasers shall make their own test to determine suitability of such products for their particular purposes. Likewise, statements concerning the possible uses of our products are not intended as recommendations to use our products in the infringement of any patent. CONNECTICUT Miller-Stephenson Chemical Co.,Inc. 55 Backus Avenue Danbury, Connecticut 06810 U.S.A. 203 743-4447 Fax 203 791-8702 ILLINOIS Miller-Stephenson Chemical Co.,Inc. 6348 Oakton Street Morton Grove, Illinois 60053 U.S.A. 847 966-2022 Fax 847 966-8468 Miller-Stephenson Chemical Co., Inc. 12261 Foothill Boulevard Sylmar, California 91342 U. S. A.